Installation and Operation Manual
50
3.18 Intercom Call Hold
Description
While on an active ICM Call, Users can place the ICM Call on hold; the held station will receive the
assigned MOH. The call is placed on Exclusive Hold and recalls at the holding station after the station
returns to idle.
Operation
To place an active ICM call on hold:
LWS-BS station and LWS-WK
1.
Press the
[Hold]
button.
GDC-400H/450H
1.
Press (
[Navigation right]
) longer than 1 second;
To retrieve the held ICM call:
LWS-BS station and LWS-WK
1.
Press the
{Station}
button associated with the held station.
GDC-400H/450H
1.
Dial a station number of held station;
Conditions
1. Only one ICM call may be placed on hold at a time.
3.19 Line Ring Assignment
Description
Each station in the system can be programmed to provide an audible signal when the system detects an
incoming call on specified Lines.
Operation
To
set “Line ring assignment”:
LWS-BS station
1.
Press
[Menu]
button.
2.
Dial 1 3 2.
3.
Select a Line.
4.
Press the button of desired station and LED of button is turned on.
5.
Press
[Save]
button.
Conditions
1.
A busy station receives the Muted ring or Call Waiting tones (as appropriat
e) for the station‟s off-
hook ring assignment. In Night/weekend mode, Line ring assignment is disabled.
