Aria 130c/130/300/600 DECT
Wireless Terminal (GDC-345H) User Guide
LG-Nortel systems
６１
Issue
2.3
MENU
(
UP
or
DOWN
)key + 5 + 1 +
REDIAL
( ) +
AC code
+
REDIAL
( ) +
FT #
+
OK ( )
key
GDC-345H
1) Press
MENU
(
UP
( ) or
DOWN
( ) button.
2) Main Menu is displayed on the LCD.
3) Press (or set ‘
>
’ mark to ‘
5 System
’ by pressing
UP
( ) button or
DOWN
( )
button and press
OK
button).
4) System menu is displayed on the LCD.
5) Press (Or set ‘
>
’ mark to ‘
1 Register
’ by pressing
UP
( ) button or
DOWN
( )
button and press
OK
button).
6) Press
REDIAL
( ) key.
7) In Auto mode, a user needs not to input
PARK
value. The wireless terminal tries to search
for the registrable system and “
SEARCHING
” is displayed on the LCD. After locking into
the system, “
ENTER AC
” is displayed on the LCD.
8) Enter
AC
code.
9) Press
REDIAL
( ) key.
10) ‘1’, ‘2’, ‘3’, ‘4’ or ‘_’ are displayed on the LCD. A number means FT number that it is not
occupied yet. The under-bar means the wireless terminal is already subscribed to the
system. Therefore, the number of ‘_’ means the number of subscribed system. If 4 under-
bar are displayed on the LCD, that means no subscription is allowed any more. Enter FT
number by pressing numeric key if any number exists. After selecting, it is possible to re-
select FT number by pressing
FLASH
button on cancel selection.
11) Press
OK
button
12) Success or failure of the subscription is notified with confirmation tone to the attendant and
the wireless terminal.
13) If succeeded in subscription, the wireless terminal goes to an idle state and its station
number is displayed.
14) If failed, repeat 3) ~ 6) steps of the attendant and 1) ~ 7) steps of wireless terminal.
GDC-345H
U N R E G I
S T E R E D
