ARIA SOHO Version 1 Issue 0.3
ADMIN Programming Manual
June, 2006
51
3.4 System Timers (PGM 180-182)
3.4.1 System Timers I (PGM 180)
In this program mode, the following items can be customized:
1. Press the [TRANS PGM] button
2. Dial
180
3. Follow the specific Procedure as listed in the Table.
PGM 180
DESCRIPTION
PROCEDURE
COMMENTS
Attendant Recall
Timer
If a recalled call arrives at the Attendant
Station, and the Attendant does not answer
within the designated time, the System will
disconnect the call.
+ FLEX1 + Minutes (2
digits, Range=00-60) +
[HOLD/SAVE]
Call Park Recall
Timer
Designates the amount of time before a call
placed in park location will recall at the
Station that placed the call on park.
+ FLEX2 + Seconds (3
digits, Range=000-600) +
[HOLD/SAVE]
Camp On Recall
Timer
When a call is transferred using Camp-On to
a busy Station, if the transferred-to Station
does not answer the call, it will recall to the
transferring station after the designated time
expires.
+ FLEX3 + Seconds (3
digits, Range=000-200) +
[HOLD/SAVE]
Exclusive Hold
Recall Timer
Designates the amount of time before a call
placed on system hold will recall at a Station
that placed the call on hold.
+ FLEX4 + Seconds (3
digits, Range=000-300) +
[HOLD/SAVE]
I-Hold Timer
When a recalled call is not answered, it will
recall to the Attendant after the designated
timer expires.
+ FLEX5 + Seconds (3
digits, Range=000-300) +
[HOLD/SAVE]
System Hold Recall
Timer
Designates the amount of time before a call
placed on System Hold will recall at the
Station that placed the call on Hold.
+ FLEX6 + Seconds (3
digits, Range=000-300) +
[HOLD/SAVE]
Transfer Recall
Timer
Designates the amount of time a transferred
call will ring at a transferred-to Station, and
how long it will recall at the transferring
Station.
+ FLEX7 + Seconds (3
digits, Range=000-300) +
[HOLD/SAVE]
ACNR Delay Timer
Designates the time delay when there is no
available CO Line in the group.
+ FLEX8 + Seconds (3
digits, Range=000-300) +
[HOLD/SAVE
ACNR No Answer
Timer
The System will detect a CO ring back tone
at the CO party. If the call is not answered,
the system will disconnect the call.
+ FLEX9 + Seconds (2
digits, Range=00-50) +
[HOLD/SAVE
ACNR Pause Timer
When the ACNR Pause Timer expires,
ACNR is activated.
+ Seconds (3
digits, Range=005-300) +
[HOLD/SAVE
