ARIA SOHO Version 1 Issue 0.3
ADMIN Programming Manual
June, 2006
66
3.5.5 VM Group Attribute
If the Hunt Group type selected is VM Group, the following items can be customized:
1. Press the [TRANS/PGM] button
2. Dial
191
3. Enter the appropriate Hunt Group Number.
4. Follow the specific Procedure as listed in the Table.
PGM 191
DESCRIPTION
PROCEDURE
COMMENTS
Wrap-up Timer
Designates the amount of time a
call will be held in a busy state
following expiration of the timer.
+ FLEX1 + Seconds
(Range=002-999) +
[HOLD/SAVE]
Put Mail Index
One of the VM dialing tables.
+ FLEX2 + VALUE
(Range=1-4) +
[HOLD/SAVE]
Get Mail Index
One of the VM dialing tables.
+ FLEX3 + VALUE
(Range=1-4) +
[HOLD/SAVE]
Hunt Type
Used to set the Hunt Group type
for VM members.
+ FLEX4 + 1 (Circular) +
[HOLD/SAVE]
VALUES –
1 = Circular
2 = Terminal
SMDI Port
The Simplified Message Desk
Interface (SMDI) dictates the
distribution of VM information.
Does not need to be
programmed
Overflow Timer
If the timer expires after a call is
received in the Group, the call
will be routed to the Overflow
Destination.
+ FLEX6 + Seconds
(Range=000-600) +
[HOLD/SAVE]
Overflow Destination
Calls to a Station in the Group
will continue to route until
answered or each Station in the
Group has been tried. The call
will remain at the last Station in
the Group or will be passed to
the overflow
Station/Group/VMIB/System
Speed Bin, after the Overflow
Timer expires.
+ FLEX7 + Destination
Type (Refer to Values,
Range=1-4) +
[HOLD/SAVE]
VALUES –
1 = Station #
2 = Hunt #
3 = VMIB 00-70
(00=Not Assigned)
4 = System Speed #
(2000-2499)
