ARIA SOHO Version 1 Issue 0.3
ADMIN Programming Manual
June, 2006
69
3.7 LCR (PGM 220 - 223)
3.7.1 LCR Attributes (PGM 220)
In this program mode, the following items can be customized:
1. Press the [TRANS/PGM] button
2. Dial
220
3. Enter the appropriate Hunt Group Number.
4. Follow the specific Procedure as listed in the Table.
PGM 220
DESCRIPTION
PROCEDURE
COMMENTS
CO Line Number
Used to select the LCR access
mode.
+ FLEX1 + VALUE
(Range=1-6) +
[HOLD/SAVE]
VALUES –
1 = M00 (Disable
LCR)
2 = M01 (Only Loop
LCR)
3 = M02 (Internal and
Loop LCR)
4 = M11 (Loop and
direct CO LCR)
5 = M12 (Internal,
Loop and Direct CO
LCR)
6 = M13 (Internal,
Loop, and Direct CO
and Direct Loop LCR)
Day Zone
Used to set up the LCR settings;
each day can be grouped up to
3 Zones.
+ FLEX2 + VALUE
(Range=FLEX1-FLEX7) +
[HOLD/SAVE]
VALUES –
FLEX1 = Monday
FLEX2 = Tuesday
FLEX3 = Wednesday
FLEX4 = Thursday
FLEX5 = Friday
FLEX6 = Saturday
FLEX7 = Sunday
Value2:
Zone1-3 (1 digit)
Time Zone of Day Zone1 Each time of day Zone1 can use
different LCR settings; each
time of day Zone1 can be
grouped up to 3 zones. The time
not belonging to any zone will
be Zone1 by default.
NOTE—LDK accepts 24 as00, if
input is 24 as the starting value,
and vice versa. 10-13 means
10:00:00(AM) – 01:00:00(PM)
FLEX3 + FLEX1 + HH-
HH (4 digits) +
[HOLD/SAVE]
VALUES –
FLEX1 = Time Zone1
FLEX2 = Time Zone2
FLEX3 = Time Zone3
