ARIA SOHO Version 1 Issue 0.3
ADMIN Programming Manual
June, 2006
72
3.7.3 Digit Modification Table (PGM222)
Digit Modification Table (DMT) is used to convert the dialed digits and secure the outgoing CO line. In the LDK
System, maximum of 100 DMT entries can be programmed. In this program mode, the following items can be
customized:
1. Press the [TRANS/PGM] button
2. Dial
222
3. Enter the appropriate VALUE (DMT Table, Range=00-99); each DMT entry has six sub-attributes as
shown.
DMT TABLE
FLEX
ITEM
DEFAULT
REMARK (VALUE)
FLEX1
Added Digit Stream (A)
NONE
Up to 20 digits
FLEX2
Removal Position (RP)
01
01-12
FLEX3
Number of Digits to be Removed
(RN)
NONE 01-12
FLEX4
Add Position (AP)
01
01-13
FLEX5
CO Line Group (C)
01
1-8
FLEX6
Alternative DMT Index (ALT)
NONE
00-24 (99)
4. Follow the specific Procedure as listed in the Table.
PGM 222
DESCRIPTION
PROCEDURE
COMMENTS
Added Digit Stream
This value is used to add digit
stream for User dialed digits (refer
to Add Position—PGM 222-
FLEX4)
+ FLEX1 + VALUE2 (20
digits, Range=0-9, #, *) +
[HOLD/SAVE]
VALUES –
[CALLBK] = Pause
[DND/FOR] = Dial tone
detection instead of
pause enter
[FLASH] = Station
Number Billing code
Removal Position
Used to set the removal position
for User dialed digits. Some digits
will be removed from the
designated position up to this
amount.
+ FLEX2 + VALUE2 (2
digits, Range=01-12) +
[HOLD/SAVE]
Add Position
Used to set the add position fro
User dialed digits. Some digits are
added from the designated
position with Add Digit Stream.
+ FLEX4 + VALUE2 (2
digits, Range=01-13) +
[HOLD/SAVE]
CO Line Group
Used when LCR calls secure the
outgoing CO line. The idle CO line
within the CO Line Group of the
determined value is seized for
LCR calls.
+ FLEX5 + VALUE2 (2
digits, Range=01-08) +
[HOLD/SAVE]
Alternative DMT
Index
Used when LCR calls are unable
to secure an idle CO line within the
Admin PGM 222-FLEX5, LCR
calls will seize an idle CO Line
Group of this value from the DMT
Index.
+ FLEX6 + VALUE2 (2
digits, Range=00-99) +
[HOLD/SAVE]
