ARIA SOHO Version 1
Issue 0.2
Feature Description and Operation Manual
June, 2006
Condition
A DKTU that doesn’t have a [REDIAL] button should be programmed with a [REDIAL] flexible
button to use ACNR.
When a predefined CO Line is busy in ACNR mode, an available CO Line in the same group
will be secured.
Admin Programming
ACNR Pause Timer (PGM 180 – FLEX10)
ACNR Delay Timer (PGM 180 – FLEX8)
ACNR Tone Detect Timer (PGM180 – FLEX13) Analog CO Line only
ACNR No Answer Timer (PGM 180 – FLEX9)
ACNR Retry Counter (PGM 180 – FLEX11)
ACNR Tone Cadence (PGM 423)
2.2.8.2 Last Number Redialing
Description
The last dialed number on a CO Line can be stored (up to 32 digits) in the Station’s Last Number Redial buffer.
The User may select to redial the last number dialed on the System. On the System, each DKTU with an LCD
panel has 10 individual last dialed number directory locations.
Operation
To use Last Number Redial on a DKTU, perform the following Steps:
1.
Lift the handset or press the [MON] button.
2.
Press the [REDIAL] button
OR
3.
Press the [SPEED] button and press the * key.
4.
Press the [HOLD/SAVE] button to accept.
To use one of the recently dialed numbers in the Last Number Directory by scrolling at a DKTU with an LCD panel,
perform the following Steps:
1.
When the last dialed number is displayed, press the [UP] or [DOWN] button to find the
desired phone number (up to 10 last dialed numbers can be stored in the directory).
2.
To make a call, press the [HOLD/SAVE] button when the appropriate phone number is
displayed.
To use Last Number Redial at a SLT, perform the following:
1.
Lift the handset.
2.
Dial 552 (refer to Ref. A)
OR
3.
Press the [REDIAL] button.
18
