ARIA SOHO Version 1
Issue 0.2
Feature Description and Operation Manual
June, 2006
To make a screened transfer from a SLT, perform the following Steps:
1.
Press and release the hook-switch, the intercom dial tone should be heard.
2.
The CO Line should be placed on exclusive hold, and the Transfer Recall timer will be
activated.
3.
Dial the Station number the call will be transferred to.
4.
When the dialed Station answers, announce the call and go on-hook by replacing the
handset.
Condition
When the Attendant is enables with DSS and a Station programmed in DSS receives
transferred call, the LED DSS button at the Attendant Station will flash.
A SLT User in the screened transfer mode can activate broker call with the hook-flash and then
converse with both the transferred Station and the CO Line call.
A call cannot be transferred to another busy SLT from a SLT; when receiving a busy tone, a
SLT user can be connected to the CO Line with a hook-flash.
If a transfer is made while dialing on a CO Line exists, the dialing will not be transmitted.
Admin Programming
Transfer Recall timer (PGM 180 – FLEX7)
I-Hold Recall Timer (PGM 180 – FLEX5)
Attendant Recall Timer (PGM 180 – FLEX1)
No Touch Answer (PGM 111 – FLEX7)
2.3.3 Holding and Parking
2.3.3.1 Hold
Description
A Station User can place a call on hold. The following two types of hold are available depending on the desired
result (and Admin Programming):
System Hold – Any Station can retrieve this type of held call; another Station in the Group can
seize the CO Line to answer.
Exclusive Hold – Only the Station that placed the call on hold can retrieve it; another Station in
the Group cannot seize the CO Line while the call is being held at the originating Station.
Operation
To place a CO Line on Exclusive/System Hold from a DKTU, perform the following Steps:
1.
While on a call, press the [HOLD/SAVE] button once (System Hold) or twice (Exclusive Hold),
depending on Hold Preference setup (refer to Ref. A).
To place a CO Line on Exclusive/System Hold from a SLT (depending on Hold Preference), perform the following
Steps:
1.
While on a call, hook-flash and dial 560 (refer to Ref. B).
34
