ARIA SOHO Version 1
Issue 0.2
Feature Description and Operation Manual
June, 2006
To access a CO Line on Exclusive/System Hold from the DKTU where the call was placed on hold, perform the
following Steps:
1.
Lift the handset.
2.
Press the {CO} button
OR
3.
Dial 8# and the CO Line number (refer to Ref. C).
To access a CO Line on Exclusive/System Hold from the SLT where the call was placed on hold, perform the
following Steps:
1.
Lift the handset.
2.
Dial 8* (refer to Ref. D).
Condition
The CO Line placed on Exclusive Hold will flash at the Station and the LED of CO Line will light
at other Stations.
The CO Line placed on System Hold will flash at all Stations.
When Exclusive Hold is set at a Station, the Exclusive Hold Recall timer will be initiated; after
the timer expires, the original Station will receive a recall ring for the duration for the I-Hold
Recall timer.
When a System Hold is set at a Station, the System Hold Recall timer will be initiated; after the
timer expires, the original Station will receive a recall for the duration of the I-Hold Recall timer.
When the I-Hold Recall timer expires the Attendant will receive a recall ring for the duration of
the Attendant Recall timer; if the call remains unanswered, the call will be disconnected.
If a call is placed on I-Hold while dialing on a CO Line exists, the dialing will not be transmitted.
Reference
A.
Hold Preference: 2.3.3.2
B.
Refer to ARIA SOHO Hardware Description and Installation Manual, System Hold Code (PGM 106 –
FLEX20).
C.
Refer to
ARIA SOHO Hardware Description and Installation Manual
, Held Individual CO Line Code
(PGM 107 – FLEX11).
D.
Refer to
ARIA SOHO Hardware Description and Installation Manual
, Access Held CO Group Code
(PGM 107 – FLEX10).
Admin Programming
Hold Preference (PGM 160 – FLEX8)
Attendant Recall Timer (PGM 180 – FLEX1)
Exclusive Hold Recall Timer (PGM 180 – FLEX4)
System Hold Recall Timer (PGM 180 – FLEX6)
Transfer Recall Timer (PGM 180 – FLEX7)
35
