ARIA SOHO Version 1
Issue 0.2
Feature Description and Operation Manual
June, 2006
2.3.3.2 Hold Preference
Description
Preferred Hold type is set by Admin Programming. When a User presses the [HOLD] button, the preferred type of
hold is activated. If the User presses the [HOLD] button twice, the other type is activated (toggle).
Operation
If System Hold is set as preferred Hold, and the User presses the [HOLD] button once while on a call, the call is
placed on System Hold. (refer to Ref. A).
If System is set as preferred Hold, and the User presses the [HOLD] button twice while on a call, the call is placed
on Exclusive Hold (refer to Ref. A).
When Exclusive Hold is activated, the call cannot be accessed by another Station in the Group.
When System Hold is activated, calls can be accessed by other Stations in the Group.
Reference
A.
System/Exclusive Hold: 2.3.3
Admin Programming
Hold Preference (PGM 160 – FLEX8)
2.3.3.3 Automatic Hold
Description
When a Station is connected to a CO call, the Station User can make another intercom call just by pressing the
DSS button. In this case, the previous CO call is automatically held.
Operation
To use Automatic Hold while on a CO Line call, perform the following Steps:
1.
Press the {CO} button.
2.
When the new CO Line is connected, the previous CO call is placed in the Admin
Programmed preferred Hold state.
Admin Programming
Automatic Hold (PGM 112 - FLEX2)
2.3.3.4 Park
Description
A User can Park a call in a virtual location, and then make a Page announcement for the desired User to pick-up
the Parked call. The Paged User can retrieve the call by dialing the designated location number.
NOTE—A Station must have a {CO} or {LOOP} button to retrieve a parked call.
36
