ARIA SOHO Version 1
Issue 0.2
Feature Description and Operation Manual
June, 2006
Operation
To Park a call, perform the following Steps:
1.
Press the [TRANS/PGM] button.
2.
Dial the parking location 601-608 (refer to Ref. A).
3.
Replace the handset or go on-hook.
4.
Page the desired User to retrieve the call.
To retrieve the Parked call from a DKTU, perform the following:
1.
Lift the handset or press the [MON] button.
2.
Dial the parked location to retrieve the parked call.
Condition
To pick-up Parked calls, a Station should have a {CO} or {LOOP} button.
If a parked call remains unanswered for the duration of the Call Park Recall time, the original
Station that parked the call will receive a recall ring. If the call remains unanswered, then the
Attendant will receive a recall ring. If the Attendant does not answer in the Attendant Recall
timer duration, the CO Line call will be disconnected and the line will be returned to an idle state.
Reference
A.
Refer to ARIA SOHO Hardware Description and Installation Manual, Call Park Location (PGM 107 –
FLEX5).
Admin Programming
Call Park Recall Timer ((PGM 180 – FLEX2)
2.3.4 Pick-up
Description
A Station User can pick-up a call received at another Station. The following pick-up types are available:
Directed Call Pick-up—Allows a User to pick-up a call ringing at another Station within the
available Intercom Tenancy Group (refer to Ref. A).
Group Call Pick-up—Allows a User to pick-up a call ringing at another Station in the same pick-
up Group.
Reference
B.
Intercom Tenancy Group: 2.4.14 (PGM 120)
2.3.4.1 Directed Call Pick-up
Description
A Station can pickup a call ringing other Station by dialing the Direct Call Pick-up code (refer to Ref. A), plus the
ringing Station number.
37
