ARIA SOHO Version 1
Issue 0.2
Feature Description and Operation Manual
June, 2006
Condition
If a Wake-Up alarm is registered at a Station, a * symbol is displayed in front of the present time
on the LCD.
If VMIB is installed, the voice message for the Wake-Up time is heard 3 times and then MOH is
heard.
If the Wake-Up ring is not answered after 3 times, it is cancelled.
If the System Attendant dials to the wake-up fail Station and erase the Wake-up Fail Ring
(PGM182 – FLEX7), the Fail Ring will disappear following the confirmation tone; when the
Wake-Up Fail Ring timer expires, the confirmation tone will not be provided and the Fail Ring
will disappear (refer to the following values).
- 00 = wake-up fail ring will not disappear automatically.
- 99 = the fail ring will not disappear automatically.
- 1-98 = after Wake-up Fail Ring timer expires, the wake-up fail ring will disappear
automatically.
Admin programming
Wake-up Fail Ring Timer (PGM 182 – FLEX7)
2.4.26 Automatic Fax Transfer
Description
The System will determine if an incoming call from the preprogrammed CO Line is for a FAX or for a Speech
terminal by detecting the tone of the call (1100 Hz, 0.5s ON/3s OFF repeated). When the System detects a FAX
tone from the incoming CO Line within the predetermined time, the System will transfer the call to the appropriate
FAX Station. If the FAX tone is not detected within the predetermined time, the System will transfer the call to the
appropriate Station(s).
Condition
Only one CO Line can be programmed as a FAX CO Line; if the FAX CO Line is not
programmed, Automatic Fax Transfer will not be activated.
Station 106 is used as the FAX Station; the FAX machine should be connected to the port for
Station 106 to use this feature.
If the FAX CO Line is not answered within the FAX CO call time, the incoming call will be
disconnected.
An outside caller connected to the FAX CO Line will hear a ring back tone while the System is
detecting a FAX tone.
In order to transfer calls from the FAX to a FAX Station, do not assign a CO ring to the FAX
Station.
If a CO Line is programmed for DISA and for Automatic FAX Transfer, the incoming calls from
that CO Line are served as DISA calls; if a User wants to call the FAX Station, just call Station
106 by exploiting DISA call.
When the FAX machine goes idle after a FAX call, the associated CO Line is released.
If the FAX CO Line is disconnected during a FAX call, the CO Line will be released and the
FAX machine will return to an idle state.
Only Analog lines are enabled for using this feature.
Admin Programming
Auto FAX Transfer CO (PGM 161 – FLEX17)
FAX Tone Detect Timer (PGM 182 – FLEX13)
FAX CO Call Timer (PGM182 – FLEX14)
65
