ARIA SOHO Version 1
Issue 0.2
Feature Description and Operation Manual
June, 2006
To use this feature with the LDP-7024LD, perform the following:
1.
Press the programmed {CALL LOG} button.
2.
The User can scroll through the numbers by pressing the up//down navigation buttons to
locate received calls, dialed calls, and lost calls.
3.
When the CLI of the desired number is displayed, press the SEND key; the System will
establish a call to that number
OR
4.
Press DETAIL to display the time and date of the selected call before pressing Send.
Condition
To use this feature, a flexible must be programmed for {CALL LOG}.
A User can program the Call Log List number, in the range of 15-50, per Station (PGM 160 –
FLEX19)
When the Call Log List number is programmed, the All Call Log database will be initialized.
Maximum Call Log List per System is 500 for ARIA SOHO.
The System assigns the Call Log list from the first available port in order.
Must enable CLI MSG-Wait to be able to use the Lost Call Log.
Admin Programming
Call Log List Number (PGM 160 – FLEX19)
CLI MSG-Wait (PGM 114 – FLEX4)
2.4.32 In Room Indication
Description
When a Supervisor presses a programmed In-Room Indication button and the [HOLD/SAVE] button in an idle
state, the LED In-Room Indication button of all network member phones will illuminate. Up to 10 groups consisting
of up to 20 members (not including the Supervisor) can be programmed.
Operation
To program a flexible button as the In-Room Indication button, perform the following Steps:
1.
Press the [TRANS/PGM] button.
2.
Press the flexible button to be assigned.
3.
Dial the code [TRANS/PGM] + * + 8
4.
Press the [HOLD/SAVE] button.
To activate or deactivate the In-Room Indication button, perform the following:
1.
Verify if the Supervisor station is in an idle state, and the In-Room Indication button has been
programmed.
2.
Press the In-Room Indication button and press the [HOLD/SAVE] button.
70
