ARIA SOHO Hardware Description and Installation Manual
Issue 1
TERMINAL CONNECTION AND WIRING METHOD
Aug, 2006
51
5.2.2 Rack Mount Wiring
1. Ensure the BKSU and EKSU have been installed correctly.
2. Connect cables to the CO/STA port and the MOH/USB/RS-232C ports as shown in Figure 5.2.2.
3. Connect the Power cord and the Battery cable.
4. Remove plastic filter pieces.
5. Tie all the cables and the Power cord (if desired) through the tie slot at the bottom-right side of the
KSUs using the tie cable provided.
6. Close the cover of the KSUs and close the cord cover.
FIGURE 5.2.2 RACK MOUNT WIRING