ARIA SOHO Hardware Description and Installation Manual
Issue 1
STARTING THE ARIA SOHO
Aug, 2006
56
6.2.3.2 Board Assignment (PGM 101)
To use CO line, extension line, and board, first of all if the code of these boards is registered on system at PGM101,
you can normally use the board.
When registering board, if the 4
th
pole (SW1) of the MBU is on, the board is automatically registered. And while using
ARIA System, in case of adding some of boards, if passively assigning those, you can use it. When the 4
th
pole
(SW1) of the MBU is on and board is automatically registered, you must make the 4
th
pole (SW1) of the MBU off and
system reset
At Admin programming mode,
1. Press the
[TRANS/PGM]
PGM number (101)
2. Enter slot number (2 digits)
3. Press
[FLEX1]
button.
4. Enter Board Type code (2 digits)
5. Press the
[HOLD/SAVE]
button to accept the change.
BOARD ID
STA
CODE
COL
CODE
ETC
CODE
DPU
SLIB16
SLIB8
HYBRID
11
13
14
17
LCOB3
33
VMIU
AAFU
64
65
SLOT DEFINITION
SLOT NUMBER
SLOT POSITION
KINDS OF BOARDS
01
Hybrid on BKSU
HYBRID
02
Optional extension slot on BKSU
HYBRID,SLIB8,SLIB16
03
Hybrid port on EKSU
HYBRID
04
Optional extension slot on BKSU
HYBRID,SLIB8,SLIB16
05
LCOB on BKSU
LCOB3
06
Optional LCOB on BKSU
LCOB3
07
LCOB on EKSU
LCOB3
08
Optional LCOB on EKSU
LCOB3
09
VMIU slot
VMIU, AAFU
10 DPU
slot
DPU