ARIA SOHO Hardware Description and Installation Manual
Issue 1
STARTING THE ARIA SOHO
Aug, 2006
60
FLEX
ITEM
DEFAULT VALUE
13 Attendant
Call
0
14
Door Open – 1
#*1
15
Door Open – 2
#*2
16
Door Open – 3
#*3
17
Door Open – 4
#*4
18
VM MSG Wait Enable
*8
19
VM MSG Wait Cancel
*9
6.2.3.7 System IP Setup (PGM 108)
To set up IP functionality, perform the following. Use the # key to skip to the next menu item, as needed:
IP Name
1. Press the [TRANS/PGM] 108.
2. Press the FLEX1 Button.
3. Enter the desired IP Name (up to 16 characters, refer to the section 6.2.3.1 DKTU button map for
Character).
4. Press the [HOLD/SAVE] button to accept changes.
Server IP Address
1. Press the [TRANS/PGM] 108.
2. Press the FLEX2 Button.
3. Enter the server IP Address (12 digits). (ex., 192168131154 for IP : 192.168.131.154 )
4. Press the [HOLD/SAVE] button to accept changes.
CI IP Address
1. Press the [TRANS/PGM] 108.
2. Press the FLEX3 Button.
3. Enter the CLI IP Address (12 digits).
4. Press the [HOLD/SAVE] button to accept changes.
Gateway Address
1. Press the [TRANS/PGM] 108.
2. Press the FLEX4 Button.
3. Enter the Gateway Address (12 digits).
4. Press the [HOLD/SAVE] button to accept changes.
Subnet Mask Address
1. Press the [TRANS/PGM] 108.
2. Press the FLEX5 Button.
3. Enter the Subnet Mask (12 digits).
4. Press the [HOLD/SAVE] button to accept changes.