LG-Nortel EARU 1103, Manual

Safety standards 

LG-

Nortel products conform to all relevant safety standards. The EARU 110X complies with 

the following safety standards: 

•IEC/EN 60950-1:2001+A11:2004—Information technology equipment - Safety, 

Part 1 : General requirements 

• IEC 60825-1:2001 and IEC 60825-2:2004—Safety of Laser Products 

• FDA 21 CFR 1040—Performance Standards for Light-Emitting Products 

Laser radiation—eye safety hazards 

LG-

Nortel optical products use laser or light-emitting diode (LED) sources that emit light 

energy into optical fibers. This energy is within the red (visible) and infrared (not 

visible) areas of the electromagnetic spectrum.FDA 21 CFR 1040—Performance 

Standards for Light-Emitting Products 

Laser radiation hazards 

correctly terminated, the optical radiation is completely enclosed. The system is a 

Class 1(IEC)/Class I (FDA) product, regardless of the power transmitted within the 

optical fiber. 

If you have unterminated optical cables (breaks in the fiber-optic cable or 

disconnected connectors) the output from circuit packs containing optical transmitters 

does not exceed Class 1 (IEC)/Class I (FDA) and is therefore considered safe under 

all reasonably foreseeable conditions. 

The following text includes additional information on the laser for the EARU 110X . 

Using optical fibers 

All activity described herein regarding the optical interface of the EARU 

110X

 is 

intended only for trained personnel operating under the direction of the service 

provider. Users and homeowners should not attempt to access or disconnect the 

optical interface or damage the optical cable. Consult with the service provider before 

undertaking any action involving the optical interface. 

Laser wavelength 1530 - 1600 nm 

Maximum laser output power <= 0.299 mW (-5.25 dBm) 

Standards: IEC 60825-1:2001 Edition 1.2 

FDA 21 CFR 1040.10:2000