LWS-BS Quick User guide
6
8. If the registration fails, repeat the procedure from Step 1 to 7 at the LWS-BS and
Step 1 to 7 from the GDC-400HM/450H.
Registering the LWS-WK to the LWS-BS
To register to the LWS-BS, below procedure is performed on the LWS-WK.
1. Press
[Menu]
button to display the menu.
2. Highlight
[Phone Register]
using the Navigation up/down key, and then press
[OK]
soft button or Navigation ‘OK’ key.
3. Select
[Subscription]
using the Navigation up/down key, and then press
[OK]
soft
button or Navigation ‘OK’ key.
4. Display
[Searching..1]
.
5. The system
[RFPI :
eg. 01234567890123
]
will be displayed when a system is found.
The RFPI of your system is available from your System Administrator, or perhaps
the attendant.
6. Press
[OK]
soft button or Navigation ‘OK’ key. In a few seconds, a confirmation tone
is received at the LWS-WK.
7. If the registration fails, repeat procedure from Step 1 to 7 at the LWS-BS and Step 1
to 6 from the LWS-WK.
LWS-BS User Operation
Call forward
1. Press
[Forward]
soft button.
2. Select forward type.(“Unconditional”, “Busy”, “No Answer”, “Busy/No Ans”)
3. Select station number or VM - Voice Mail.
4. Press
[Save]
soft button.
Call Pick-up
1. Lift the handset or press
[Speaker]
button.
2. Press
{Station}
button for ringing station.
Call Transfer
While on a call, to perform a Screened Call Transfer:
1. Press
[Trans]
.
2. Dial the station to receive the transfer.
3. When answered, announce call.
4. Hang-up to complete the transfer.
While on a call, to perform an Unscreened Call Transfer:
Summary of Contents for LWS-BS
Page 1: ...LWS BS Quick User guide 1 ...
