LG SIGNATURE OLED55B6P, Safety And Reference

9

ENGLISH

 NOTE

•

Remove the stand before installing the TV on a 

wall mount by performing the stand attachment 

in reverse. 

 CAUTION

•

To install the wall mount, use the stand assembly 

screws to attach the wall mount cover to the 

bottom of the product as shown in the following 

illustration. (For OLED55/65E6P)

Provided Item

Wall mount 

cover

X 2

Connections (Notifications)

You can connect various external devices to the TV. 

Supported external devices are: HD receivers, DVD 

players, VCRs, audio systems, USB storage devices, 

PC, gaming devices, and other external devices. 

For more information on an external device’s 

connection, refer to the manual provided with 

each device.

 NOTE

•

If you record a TV program on a DVD recorder or 

VCR, make sure to connect the TV signal input 

cable to the TV through a DVD recorder or VCR. 

For more information about recording, refer to 

the manual provided with the connected device.

•

The external device connections shown may 

differ slightly from illustrations in a manual.

•

Connect external devices to the TV regardless 

about the order of the TV port.

•

If you connect a gaming device to the TV, use the 

cable supplied with the gaming device.

•

Refer to the external equipment’s manual for 

operating instructions.

•

In PC mode, there may be noise associated 

with the resolution, vertical pattern, contrast, 

or brightness. If noise is present, change the PC 

output to another resolution, change the refresh 

rate to another rate, or adjust the brightness and 

contrast on the 

PICTURE

 menu until the picture 

is clear.

•

Depending upon the graphics card, some 

resolution settings may not allow the image to 

be positioned on the screen properly.

•

Some USB Hubs may not work. If a USB device 

connected through a USB Hub is not detected, 

connect it directly to the USB port on the TV.

•

The TV may be capable of operating without a 

set-top from a multichannel video programming 

distributor (MVPD).

Connecting to an Antenna or Cable

Connect an antenna, cable, or cable box to watch 

TV. The illustrations may differ from the actual 

items and an RF cable is optional.

 CAUTION

•

Make sure not to bend the copper wire of the RF 

cable.

Copper wire

•

Complete all connections between devices, and 

then connect the power cord to the power outlet 

to prevent damage to your TV.

 NOTE

•

Use a signal splitter to use 2 TVs or more.

•

DTV Audio Supported Codec: MPEG,  

Dolby Digital.

•

Direct ULTRA HD broadcast is unavailable in 

areas without an ULTRA HD signal. 

•

This TV cannot receive ULTRA HD (3840 x 2160 

pixels) broadcasts directly because the related 

standards have not been confirmed.  

(Depending upon model)