background image

ENGLISH

5

Lifting and moving the TV

Please note the following advice to prevent the TV from being scratched 
or damaged and for safe transportation regardless of its type and size.

•  It is recommended to move the TV in the box or packing material 

that the TV originally came in.

•  Before moving or lifting the TV, disconnect the power cord and 

all cables.

•  When holding the TV, the screen should face away from you to 

avoid damage.

•  Hold the top and bottom of the TV frame firmly. Make sure not to 

hold the transparent part, speaker, or speaker grill area.

•  When transporting a large TV, there should be at least 2 people. 
•  When transporting the TV by hand, hold the TV as shown in the 

following illustration.

•  When transporting the TV, do not expose the TV to jolts or 

excessive vibration.

•  When transporting the TV, keep the TV upright, never turn the TV 

on its side or tilt towards the left or right.

•  Do not apply excessive pressure to cause flexing / bending of frame 

chassis as it may damage screen.

•  When handling the TV, be careful not to damage the protruding 

buttons.

•  Avoid touching the screen at all times, as this may result in 

damage to the screen.

•  Do not move the TV by holding the cable holders, as the 

cable holders may break, and injuries and damage to the 
TV may occur.

•  When supported cable is not long enough to connect 

TV set with Companion Box (AV Box), you can use an 
extension cable.

•  Please do not pile the stuff up or press strongly the 

speaker. This may result in product damage or degradation.

Mounting to the Wall

When you attach the TV to other building materials, please contact 
qualified personnel.

•  Do not apply foreign substances (oils, lubricants, etc.) to 

the screw parts when assembling the product. (Doing so 
may damage the product.)

•  Do not use any unapproved items to ensure the safety 

and product life span.

•  Any damage or injuries caused by using unapproved 

items are not covered by the manufacturer’s warranty.

•  Make sure that the screws are inserted correctly and 

fastened securely. (If they are not fastened securely 
enough, the TV may tilt forward after being installed.) 
Do not use too much force and over tighten the screws; 
otherwise screw may be damaged and not tighten 
correctly.

Summary of Contents for OLED77W8PPA






































Reviews: