background image

11

ENG

ENGLISH

11

EXTERNAL CONTROL DEVICE SETUP

2. Tune to the BS (ISDB-BS) channel 30. 

Set ID = All = 00 

Data 00 = Don’t know Physical = 00 

Data 01 & 02 = Major is 30 = 00 1E 

Data 03 & 04 = Don’t Care = 00 00 

Data 05 = Digital BS TV = 07 

Total = 

ma 00 00 00 1E 00 00 07

*  This feature is varied based on the model.

Ack [a][ ][Set ID][ ][OK][Data 00][Data 01]
[Data 02][Data 03][Data 04][Data 05]
[x][a][ ][Set ID][ ][NG][Data 00][x]

21. Channel(Programme) Add/Del(Skip) 

(Command: m b)

 

► To skip current channel(programme) for next time.

Transmission [m][b][ ][Set ID][ ][Data][Cr]

Data 00 : Del(ATSC,ISDB)/Skip(DVB)

01 : Add

Ack [b][ ][Set ID][ ][OK/NG][Data][x]

*  Set the saved channel status to del(ATSC, ISDB)/ 

skip(DVB) or add.

22. Key (Command: m c)

 

► To send IR remote key code.

Transmission [m][c][ ][Set ID][ ][Data][Cr]

Data Key code - p.2.

Ack [c][ ][Set ID][ ][OK/NG][Data][x]

23. Control Backlight (Command: m g)

• 

For LCD TV / LED TV

 

► To control the backlight.

Transmission [m][g][ ][Set ID][ ][Data][Cr]

Data Min : 00 to Max : 64

Ack [g][ ][Set ID][ ][OK/NG][Data][x]

    Control Panel Light (Command: m g)

• 

For Plasma TV

 

► To control the panel light.

Transmission [m][g][ ][Set ID][ ][Data][Cr]

Data Min : 00 to Max : 64

Ack [g][ ][Set ID][ ][OK/NG][Data][x]

24. Input select (Command: x b) 

(Main Picture Input)

 

► To select input source for main picture.

Transmission [x][b][ ][Set ID][ ][Data][Cr]

Data 

  00 :  DTV

  02 :  Satellite DTV 

ISDB-BS (Japan)

  03 : ISDB-CS1 (Japan)

  04 : ISDB-CS2 (Japan)

  11 : CATV

01 : CADTV

10 : ATV

  20 : AV or AV1

21 : AV2

  40 : Component1

     60 : RGB

41 : Component2

  90 : HDMI1

  92 : HDMI3

91 : HDMI2

93 : HDMI4

Ack [b][ ][Set ID][ ][OK/NG][Data][x]

*  This function depends on model and signal.

25. 3D(Command: x t) (only 3D models)  

(Depending on model)

 

► To change 3D mode for TV.

Transmission [x][t][ ][Set ID][ ][Data 00][ ][Data 01]
[ ][Data 02][ ][Data 03][Cr]

* (Depending on model)

Data Structure

[Data 00]   00 : 3D On 

01 : 3D Off 

02 : 3D to 2D 

03 : 2D to 3D

[Data 01]   00 : Top and Bottom 

01 : Side by Side 

02 : Check Board 

03 : Frame Sequential 

04 : Column interleaving 

05 : Row interleaving

[Data 02]   00 : Right to Left 

01 : Left to Right

[Data 03]   3D Effect(3D Depth): Min : 00 - Max : 14 

(*transmit by Hexadecimal code)

Summary of Contents for OLED77W8PPA






































Reviews: