LG SIGNATURE OLED77ZX Series, Safety And Reference

10

ENGLISH

_in

dex

(For installation on concrete wall)

1  Drill holes in anchor locations with a drill bit of Ø 8 mm to a 

depth of 80 mm (3.15 inches) to 100 mm (3.94 inches).

2  Clean the drilled holes.

3  Insert the enclosed anchors for fixing the wall mount into the 

holes. (Use a hammer when inserting anchors.)

Wall mounting anchor

4  Push the wall mount support closely toward the wall to match 

the hole locations.

5  Tighten screws for fixing the wall mount to the holes. At this 

time, tighten the screws to a torque of between 45 kgf/cm 
(39.06 lbf/in) to 60 kgf/cm (52.08 lbf/in).

Wall mounting screw 

(For installation on wood stud)
Use the Ø 4 mm drill bit for wood to drill holes with the depth of 76 mm 
(2.9 Inches). (Clean the drilled hole.)

Drywall

Wood stud

76 mm / (2.9 Inches)

Without using the wall mounting anchor, fasten the wall mounting 
screw directly to the wood stud.

After Installation

•

When connecting additional cables from the sides, we 
recommend holding the center of the TV horizontally or 
vertically and pulling the product to make sure there is 
sufficient distance from the wall before connecting.

•

When connecting additional cables from the bottom, we 
recommend releasing the TV from the wall mount before 
connecting.

•

Use cable management systems to arrange the 
cables at the bottom of the TV as shown below. Cable 
managements are not provided with the product, so 
purchase them separately.
(For example)

•

After installing the product, be sure to use it adhered to 
the wall.

-

Using the product while it is not adhered to the wall 
may damage or shake the product.