Sound adjustment
NICAM reception
If your set is equipped with the receiver for NICAM reception, the
high quality NICAM (Near Instantaneous Companding Audio
Multiplex) digital sound can be received.
Sound output can be selected according to the type of received
broadcast as follows by pressing the I/II button repeatedly.
1. When NICAM mono is received, you can select
NICAM
MONO
or FM MONO.
2. When NICAM stereo is received, you can select
NICAM
STEREO
or FM MONO.
3. When NICAM dual is received, you can select
NICAM DUAL I
,
NICAM DUAL II
or
NICAM DUAL I II
or
MONO
. When FM
mono is selected the display
MONO
appears on the screen.
Note : If the NICAM signal is weak, switch to mono.
Sound output selection
In AV mode, you can select output sound for the left and right
loudspeakers.
Repeatedly press the I/II button to select the sound output.
L+R
:
Audio signal from audio L input is sent to left loud-
speaker and audio signal from audio R input is sent to
right loud-speaker.
L+L
:
Audio signal from audio L input is sent to left and right
loud-speakers.
R+R
:
Audio signal from audio R input is sent to left and right
loud-speakers.
VCR Hi-Fi sound system
The received Mono, Stereo or Dual sound signal is recorded as
below regardless of your selection of speaker or sound.
If you press I/II button while playing the tape recorded as Hi-Fi,
sound can be selected as below.
Hi-Fi
L+L
R+R
MONO
Note : If you hear any noise while playing a Hi-Fi tape, select
mono sound.
15
I/II
Broadcast
Mono
Stereo
Dual
Audio MONO Tracks
MONO
L+R
I
Audio Hi-Fi Tracks
MONO
L+R
I+II
Summary of Contents for 026N/U TX
Page 31: ......