79
ENG
ENGLISH
CUSTOMIZING SETTINGS
Setting
Description
Country
Selects a desired country.
y
y
If you do not finish the set-up Installation Guide by pressing or if you time out on
the OSD (On Screen Display) the installation menu will continuously appear until the set
up is completed whenever the TV is switched on.
y
y
If you select the wrong local country, teletext may not appear correctly on the screen
and some problems may occur during teletext operation.
y
y
The CI (Common Interface) function may not be applied based on country broadcasting
circumstances.
y
y
DTV mode control buttons may not function based on country broadcasting
circumstances.
y
y
In country that Digital broadcasting regulation isn’t fixed, some DTV function may not
work depending on digital broadcasting circumstances.
y
y
The Country Setting “UK” should only be activated in UK.
y
y
If the country setting is set to “--”, European terrestrial digital standard broadcasting
programmes are available, but some DTV functions may not work properly.
NOTE
Disabled Assist-
ance
(In Digital
Mode only)
Option
Hard of Hearing
This function is for the hearing impaired.
Audio Description
This function is for the blind, and provides explanatory audio describ-
ing the current situation in a TV programme in addition to the basic
audio.
When
Audio Description On
is selected, basic audio and Audio
Description are provided only for those programmes that have Audio
Description included.
Volume
Changes the Audio Description volume
Beep
Beeps when a programme with Audio Description
information is selected
ISM Method
A frozen or still picture displayed on the screen for prolonged periods will result in a ghost image
remaining even when you change the image. Avoid allowing a fixed image to remain on the
screen for prolonged periods.
Option
Normal
Sets it if image sticking is never a problem.
Orbiter
Orbiter may help prevent ghost images. However, it is best not to al-
low any fixed image to remain
on the screen. To avoid a permanent image on the screen, the screen
will move every 2 minutes.
Colour Wash
The colour block with the screen moved a little and the white pat-
tern are alternately displayed. It is difficult to sense the afterimage
occurred while the temporary afterimage is removed and the colour
pattern is operating.
Data Service
(only in Ireland.)
This function allow users to choose between MHEG (Digital Teletext) and Teletext if both exist at
the same time.
Factory Reset
This function initializes all settings.
y
y
In
Lock System “On”
, if you forget your password, press ‘0’, ‘3’, ‘2’, ‘5’ on the remote
control handset.
NOTE
Set ID
Adds an ID to the connected devices
Summary of Contents for 0PA5500-ZB
Page 3: ...3 ENG ENGLISH LICENSES ...
Page 135: ......
