background image

6

ENG

ENGLISH

SAFETY INSTRUCTIONS

 

y

Do not allow any impact, shock or any 

objects to fall  into the unit, and do not 

drop anything onto the screen.  

You may be injured or the product can be 

damaged.

 

y

Never touch this product or antenna 

during a thunder or lighting storm.  

You may be electrocuted.

 

y

Never touch the wall outlet when there is 

leakage of gas, open the windows and 

ventilate.  

It may cause a fire or a burn by a spark.

 

y

Do not disassemble, repair or modify the 

product at your own discretion.  

Fire or electric shock accident can occur.  

Contact the service centre for check, 

calibration or repair.

 

y

If any of the following occur, unplug the product 

immediately and contact your local service 

centre.

 - The product has been impacted by shock

 - The product has been damaged

 - Foreign objects have entered the product

 - The product produced smoke or a strange 

smell

This may result in fire or electric shock.

 

y

Unplug the TV from AC mains wall socket if you 

do not intend to use the TV for a long period of 

time. Accumulated dust can cause fire hazard 

and insulation deterioration can cause electric 

leakage/shock/fire.

 

y

Apparatus shall not be exposed to dripping 

or splashing and no objects filled with liquids, 

such as vases, shall be placed on the 

apparatus.

 

y

Do not install this product on a wall if it could 

be exposed to oil or oil mist. 

This may damage the product and cause it to 

fall. 

 CAUTION

 

y

Install the product where no radio wave occurs.

 

y

There should be enough distance between an 

outside antenna and power lines to keep the 

former from touching the latter even when the 

antenna falls.  

This may cause an electric shock.

 

y

Do not install the product on places such 

as unstable shelves or inclined surfaces. 

Also avoid places where there is vibration or 

where the product cannot be fully supported. 

Otherwise, the product may fall or flip over, 

which may cause injury or damage to the 

product.

Summary of Contents for 105UC9T-TA

























































Reviews: