3
Connecting LAN Adapter
ENGLISH
System Shutdown / Power Off
Press the [
] key or [Ctrl]+[ESC] to display the Start menu.
-
Press the Start button [
/
] > Power button [
]and select [Shut down].
Important Safety Precautions
Check the following ‘Important Safety Precautions’ to prevent unexpected
danger or damage in advance.
‘Important Safety Precautions’ is divided into ‘Warning’ and ‘Caution.’
WARNING:
Noncompliance with the instruction may cause serious physical damage
or fatal injuries.
!
CAUTION:
Noncompliance with the instruction may cause minor damage to the body
or the machine.
While Using the Product
WARNING
Use batteries certified and
acknowledged by
LG Electronics Inc.
• Otherwise, an explosion or
fire may occur.
Keep the battery away from
heat.
• Otherwise, an explosion or
fire may occur.
Avoid storing or using this
product in places with
high humidity levels and
temperatures above 60 °C,
such as the inside of a car or
sauna.
• Otherwise, an explosion or
fire may occur.
If you find leakage or smell bad
odor from the battery, contact
the local service center.
• Otherwise, an explosion or
fire may occur.
Connecting LAN Adapter
1 Connect the LAN adapter to the USB-C™ port on the PC.
• The USB-C™ port can be used without having to
differentiate between the top and bottom surfaces.
2 Connect the network cable (LAN) to the LAN adapter.
3 Check if you can connect to the internet properly.
Power Connection
The AC adapter is used to power and charge the PC.
• Do not use any other AC adapter than the one that was provided when you purchased
this product.
• The power cable and AC adapter may differ depending on your country or region.
1 Connect an end of the cable to the AC adapter
and the other end to a power outlet.
• The AC adapter can be used from 100 V to 240 V.
2 Connect the AC adapter to the PC.
• Ensure that the power jack linked to the
AC adapter and product is connected firmly.
When the AC adapter is connected, the AC adapter lamp turns on.
Status
Power Lamp
On
The AC adapter is connected.
Off
The AC adapter is not connected.
• If you try to turn on the system that has entered the Hibernates mode or been turned
off after a low-battery alarm, the system will not be turned on but the lamp will
blink three times. If this is the case, connect the AC adapter and charge the battery
sufficiently before using it.
