LG 16U70Q Series, Owner'S Manual

3

Connecting LAN Adapter

ENGLISH

System Shutdown / Power Off

Press the [ 

 ] key or [Ctrl] + [ESC] to display the Start menu.

-

Press the Start button [ 

 ] > Power button [ 

 ] and select [Shut down].

Important Safety Precautions

Check the following ‘Important Safety Precautions’ to prevent unexpected 

danger or damage in advance.
‘Important Safety Precautions’ is divided into ‘WARNING’ and ‘CAUTION.’

WARNING

: Noncompliance with the instruction may cause serious 

physical damage or fatal injuries.

!

CAUTION: 

Noncompliance with the instruction may cause minor damage to 

the body or the machine.

While Using the Product

 WARNING

Use batteries certified and 

acknowledged by  

LG Electronics Inc.

• Otherwise, an explosion 

or fire may occur.

Keep the battery away from 

heat.

• Otherwise, an explosion 

or fire may occur.

Avoid humidity and heat 

above 140 °F as in cars or 

saunas.

• Otherwise, an explosion 

or fire may occur.

If you find leakage or smell 

bad odor from the battery, 

contact the local service 

center.

• Otherwise, an explosion 

or fire may occur.

Connecting LAN Adapter

To connect to the wired LAN, you must purchase a LAN adapter separately.

1  Connect the LAN adapter to the USB-C™ port on the PC.

• The USB-C™ port can be used without having to 

differentiate between the top and bottom surfaces.

2  Connect the network cable (LAN) to the LAN adapter.
3  Check if you can connect to the internet properly.

Power Connection

The AC adapter is used to power and charge the PC.

• Do not use any other AC adapter than the one that was provided when you 

purchased this product.

1  Connect an end of the cable to the AC adapter 

and the other end to a power outlet.

• The AC adapter can be used from 100 V to 240 V.

2  Connect the AC adapter to the PC.

• Ensure that the power jack linked to the  

AC adapter and product is connected firmly.

When the AC adapter is connected, the AC adapter lamp turns on.

Status

Power Lamp

On

When the AC adapter is connected and charging is complete.

Blinking When the AC adapter is connected and is charging.

Off

The AC adapter is not connected.

• If you try to turn on the system that has entered the Hibernates mode or been 

turned off after a low-battery alarm, the system will not be turned on but the 

lamp will blink three times. If this is the case, connect the AC adapter and charge 

the battery sufficiently before using it.