ENG
ENGLISH
15
Maintenance
Cleaning your TV
Clean your TV regularly to keep the best performance and to extend
the product lifespan.
y
Make sure to turn the power off and disconnect the power cord
and all other cables first.
y
When the TV is left unattended and unused for a long time,
disconnect the power cord from the wall outlet to prevent
possible damage from lightning or power surges.
Screen, frame, cabinet and stand
To remove dust or light dirt, wipe the surface with a dry, clean, and
soft cloth.
To remove major dirt, wipe the surface with a soft cloth dampened in
clean water or a diluted mild detergent. Then wipe immediately with
a dry cloth.
y
Avoid touching the screen at all times, as this may result in
damage to the screen.
y
Do not push, rub, or hit the screen surface with your fingernail
or a sharp object, as this may result in scratches and image
distortions.
y
Do not use any chemicals as this may damage the product.
y
Do not spray liquid onto the surface. If water enters the TV, it
may result in fire, electric shock, or malfunction.
Power cord
Remove the accumulated dust or dirt on the power cord regularly.
Preventing “Image burn” or “Burn-in” on
your TV screen
y
If a fixed image displays on the TV screen for a long period
of time, it will be imprinted and become a permanent
disfigurement on the screen. This is “image burn” or “burn-in”
and not covered by the warranty.
y
If the aspect ratio of the TV is set to 4:3 for a long period of
time, image burn may occur on the letterboxed area of the
screen.
y
Avoid displaying a fixed image on the TV screen for a long
period of time (2 or more hours for LCD) to prevent image
burn.
Troubleshooting
Cannot control the TV with the remote control.
y
Check the remote control sensor on the product and try again.
y
Check if there is any obstacle between the product and the
remote control.
y
Check if the batteries are still working and properly installed
( to , to ).
No image display and no sound is produced.
y
Check if the product is turned on.
y
Check if the power cord is connected to a wall outlet.
y
Check if there is a problem in the wall outlet by connecting
other products.
The TV turns off suddenly.
y
Check the power control settings. The power supply may be
interrupted.
y
Check if the
Auto Power Off
(Depending on model) /
Sleep Timer
/
Timer Power Off
feature is activated in the
Timers
settings.
y
If there is no signal while the TV is on, the TV will turn off
automatically after 15 minutes of inactivity.
When connecting to the PC (HDMI/RGB), 'No Signal', 'Check
signal cable' or ‘Unsupported Format’ is displayed.
y
Turn the TV off/on using the remote control.
y
Reconnect the HDMI/RGB cable.
y
Restart the PC with the TV on.
If TV is turned off automatically.
y
If
Timer Power On
is enabled, the TV will be turned on at the
specified time. If you do not operate the TV for two hours, the
TV will be turned off automatically.
y
To disable this function, use your remote control to go to
(Settings) Timers Timer Power On
2 Hours Auto Power Off Off
.
