background image

LGE Internal Use Only

Copyright © 2010 LG Electronics. Inc. All right reserved. 
Only for training and service purposes

- 14 -

No Raster on PC Signal

Check Input source Cable

and Jack.

Pass

Re-soldering or
Change the defect part. 

Pass

Check the Input/Output

Of IC201.

Fail

Re-soldering or
Change the defect part,
Check RGB EDID Data.

Repeat [A], & [B] Process

Pass

Check the Input/Output

Of JK202.

Fail

Pass

Check the Input/Output

of IC800

Fail

Re-soldering or
Change the defect part.

Pass

No Raster on COMMPONENT Signal

Check Input source 

Cable and Jack.

Pass

Re-soldering or 

Change the defect part.

Pass

Check the Input/Output

Of IC800.

Fail

Re-soldering or 

Change the defect part.

Repeat [A], & [B] Process.

Check the Input/Output

of JK101.

Fail

Pass

No Raster on HDMI Signal

Check Input source 

Cable And Jack.

Pass

Check

the Input/Output of JK301,

JK302, JK303.

Fail

Re-soldering or 

Change the defect part.

Pass

Pass

Check

the Input/OutputOf IC300,

IC301, JK302.

Fail

Re-soldering or 

Change the defect part.
Check HDMI EDID Data.

Re-download HDCP.

Pass

Pass

Check the Input/Output

Of IC800.

Fail

Re-soldering or 

Change the defect part.

Repeat [A], & [B] Process.

Summary of Contents for 22LD330




























Reviews: