12
ENGLISH
CONNECTIONS
(NOTIFICATIONS)
Connect various external devices to the TV and switch input modes
to select an external device. For more information about an external
device’s connection, refer to the manual supplied with each device.
Available external devices are: Blu-ray player, HD receivers, DVD
players, VCRs, audio systems, USB storage devices, PC, gaming
devices, and other external devices.
NOTE
y
The external device connection may differ from the model.
y
Connect external devices to the TV regardless of the order of the
TV port.
y
If you record a TV program on a Blu-ray/DVD recorder or VCR, make
sure to connect the TV signal input cable to the TV through a DVD
recorder or VCR. For more information of recording, refer to the
manual provided with the connected device.
y
Refer to the external equipment’s manual for operating
instructions.
y
If you connect a gaming device to the TV, use the cable supplied
with the gaming device.
y
In PC mode, there may be noise associated with the resolution,
vertical pattern, contrast or brightness. If noise is present, change
the PC output to another resolution, change the refresh rate to
another rate or adjust the brightness and contrast on the [Picture]
menu until the picture is clear.
y
In PC mode, some resolution settings may not work properly
depending on the graphics card.
y
When connecting via a wired LAN, it is recommended to use a CAT
7 cable. (Only when
port is provided.)
y
Ethernet only supports 100 Base-T.
y
HDR (High Dynamic Range) pictures can be viewed over the
Internet or via USB and HDMI 1.4 compatible devices.
Antenna connection
Connect the TV to a wall antenna socket with an RF cable (75 Ω) (Not
Provided).
y
Use a signal splitter to use more than 2 TVs.
y
If the image quality is poor, install a signal amplifier properly to
improve the image quality.
y
If the image quality is poor with an antenna connected, try to
realign the antenna in the correct direction.
y
An antenna cable and converter are not supplied.
Satellite dish connection
(Only satellite models)
Connect the TV to a satellite dish to a satellite socket with a satellite
RF cable (75 Ω).
CI module connection
(Depending on model)
View the encrypted (pay) services in digital TV mode.
y
Check if the CI module is inserted into the PCMCIA card slot in the
right direction. If the module is not inserted properly, this can
cause damage to the TV and the PCMCIA card slot.
y
If the TV does not display any video and audio when CI+ CAM is
connected, please contact to the Terrestrial/Cable/Satellite Service
Operator.
