LG 24TN520S, Owner'S Manual

12

ENGLISH

CONNECTIONS 

(NOTIFICATIONS)

Connect various external devices to the TV and switch input modes 
to select an external device. For more information about an external 
device’s connection, refer to the manual supplied with each device. 
Available external devices are: Blu-ray player, HD receivers, DVD 
players, VCRs, audio systems, USB storage devices, PC, gaming 
devices, and other external devices.

 NOTE

y

The external device connection may differ from the model.

y

Connect external devices to the TV regardless of the order of the 
TV port.

y

If you record a TV program on a Blu-ray/DVD recorder or VCR, make 
sure to connect the TV signal input cable to the TV through a DVD 
recorder or VCR. For more information of recording, refer to the 
manual provided with the connected device.

y

Refer to the external equipment’s manual for operating 
instructions.

y

If you connect a gaming device to the TV, use the cable supplied 
with the gaming device.

y

In PC mode, there may be noise associated with the resolution, 
vertical pattern, contrast or brightness. If noise is present, change 
the PC output to another resolution, change the refresh rate to 
another rate or adjust the brightness and contrast on the [Picture] 
menu until the picture is clear.

y

In PC mode, some resolution settings may not work properly 
depending on the graphics card.

y

When connecting via a wired LAN, it is recommended to use a CAT 
7 cable. (Only when 

 port is provided.)

y

Ethernet only supports 100 Base-T.

y

HDR (High Dynamic Range) pictures can be viewed over the 
Internet or via USB and HDMI 1.4 compatible devices.

Antenna connection

Connect the TV to a wall antenna socket with an RF cable (75 Ω) (Not 
Provided).

y

Use a signal splitter to use more than 2 TVs.

y

If the image quality is poor, install a signal amplifier properly to 
improve the image quality.

y

If the image quality is poor with an antenna connected, try to 
realign the antenna in the correct direction.

y

An antenna cable and converter are not supplied.

PC connection

Switch the input mode to connect with the PC using the HDMI input.

 (INPUT) (Remote control)   [Home Dashboard]   [EDIT]   

Select ICON   [SAVE]

Other connections

Connect your TV to external devices. For the best picture and audio 
quality, connect the external device and the TV with the HDMI cable. 
Some separate cable is not provided.

y

USB port supports 0.5 A electric current. If you need more electric 
current in case of HDD, use the separate power adaptor.

 NOTE

y

Supported HDMI Audio format:
(Depending on model) 
DTS (44.1 kHz / 48 kHz / 88.2 kHz / 96 kHz), DTS HD (44.1 kHz / 
48 kHz / 88.2 kHz / 96 kHz / 176.4 kHz / 192 kHz), Dolby Digital / 
Dolby Digital Plus (32 kHz / 44.1 kHz / 48 kHz), PCM (32 kHz / 44.1 
kHz / 48 kHz / 96 kHz / 192 kHz)