LG 27LP615B, Manual

MOUNTING ON A WALL

An optional wall mount can be used with your LG Television. Consult 
with your local dealer for a wall mount that supports the VESA 
standard used by your TV model. Carefully attach the wall mount 
bracket at the rear of the TV. Install the wall mount bracket on a solid 
wall perpendicular to the floor. If you are attaching the TV to other 
building materials, please contact qualified personnel to install the 
wall mount. Detailed instructions will be included with the wall 
mount. We recommend that you use an LG brand wall mount. The LG 
wall mount is easy to adjust or to connect the cables. When you do 
not use LG’s wall mount bracket, use a wall mount bracket where the 
device is adequately secured to the wall with enough space to allow 
connectivity to external devices. If you are using a non-adjustable 
mount, attach the mount to the wall. Attach the cables to the TV first, 
then attach the TV to the mount.

100 mm (3.9 inches)

100 mm

100 mm 

100 mm

100 mm

Make sure to use screws and wall mounts that meet the VESA 
standard. Standard dimensions for the wall mount kits are described 
in the following table.

Model

27LP600B
27LP615B

Wall mount (A x B)

75 x 75

A

B

Standard screw

M4 x L10

Number of screws

4

Wall mount bracket (optional)

LSW149

 CAUTION

y

Must use the enclosed screw in the box. (Depending upon model)

y

Disconnect the power before moving or installing the TV. 
Otherwise electric shock may occur.

y

Remove the stand before installing the TV on a wall mount by 
performing the stand attachment in reverse.

y

If you install the TV on a ceiling or slanted wall, it may fall and 
result in severe injury. Use an authorized LG wall mount and 
contact the local dealer or qualified personnel. When using a third-
party wall mount, it is not covered by the warranty.

y

Do not overtighten the screws as this may cause damage to the TV 
and void your warranty.

y

Use the screws and wall mounts that meet the VESA standard. Any 
damages or injuries by misuse or using an improper accessory are 
not covered by the warranty.

y

Screw length from outer surface of back cover should be less than 
8 mm (0.3 inches).

Wall mount Pad

Back Cover

Standard screw:

M4 x L10

Wall mount Pad

Back Cover

Max.8 mm (0.3 inches)

 NOTE

y

Use the screws that are listed on the VESA standard screw 
specifications.

y

The wall mount kit includes an installation manual and necessary 
parts.

y

The wall mount bracket is optional. You can obtain additional 
accessories from your local dealer.

y

The length of screws may differ depending upon the wall mount. 
Make sure to use the proper length.

y

For more information, refer to the manual supplied with the wall 
mount.

10

ENGLISH