ENGLISH
CUSTOMIZING SETTINGS 43
SETUP
To view programme information
Press 'INFO' button.
Displays information on current programme and/or current time, etc.
TV Guide
Press 'GUIDE' button.
[In Digital mode only]
Obtains information about programmes and airtime. Checks the broadcasting time of the desired
programme and schedule viewing.
Automatically Setting Up Programme
SETTINGS> SETUP> Auto Tuning
Automatically tunes the programmes.
1.Select Country where the TV is used. Programme settings change depending on the country you
choose.
2.Initiate Auto Tuning.
3.Select Input Source of your choice.
4.Set Auto Tuning following screen instructions.
If Input Source is not connected properly, programme registration may not work.
Auto Tuning only finds programmes that are currently broadcasting.
If Lock System is turned on, a pop-up window will appear asking for password.
Cable DTV Setting option
When searching for programmes using FULL setting it can take a long time. The following values are
needed in order to search all available programmes quickly and correctly. The commonly used values are
provided as “default”.
Frequency
Enter a user-defined frequency.
Symbol rate
Enter a user-defined symbol rate (Symbol rate: Speed at which a device such as
modem sends symbols to a programme).
Modulation
Enter a user-defined modulation. (Modulation: Loading of audio or video signals
onto carrier).
Network ID
Unique identifier allocated for each user.
Start Frequency
Enter a user-defined start frequency range.
End Frequency
Enter a user-defined end frequency range.
Cable DTV Setting
SETTINGS> SETUP> Cable DTV Setting
[In Cable mode only]
When Channel Auto Update is On, you can update information for all the programmes that can be
updated, including the programme currently being watched. When Channel Auto Update is Off, you can
only update information for the programme currently being watched.
The range that a user can select from the Service Operator menu differs depending on number of Service
Operator supported by each country.
If number of supported Service Operator for each country is 1, corresponding function becomes inactive.
To use Manual Tuning
SETTINGS> SETUP> Manual Tuning
Adjusts programmes manually and saves the results.
For digital broadcasting, signal strength and signal quality can be checked.
For analogue broadcasting, you can set up station names and use fine tuning. Normally fine tuning is
only necessary if reception is poor.
[This feature is available on certain models only]
You can also adjust the Frequency(KHz) and Bandwidth.
SETUP
