ENGLISH
30
UseR seTTInGs
settings
1
To view the
osD menu
, press the
joystick button
at the
bottom of the monitor and then enter the
Menu
.
2
Go to
settings
by moving the joystick.
3
Configure the options following the instructions that appear in
the bottom right corner.
4
To return to the upper menu or set other menu items, move
the joystick to ◄ or pressing (
/ OK) it.
5
If you want to exit the OSD menu, move the joystick to ◄
until you exit.
Each option is described below.
Menu > settings
Description
language
Sets the menu screen to the desired language.
Power leD
Turns the power LED on the front of the monitor on or off.
on
The power LED turns on automatically.
off
The power LED turns off.
automatic
standby
Feature that automatically turns off the monitor when there is no movement on the screen for a
period of time. You can set a timer for the auto-off function. (OFF, 4 hours, 6 hours, and 8 hours)
DisplayPort 1.2
Enables or disables DisplayPort 1.2.
y
Be sure to configure this option according to the DisplayPort version supported by your
graphics card. Set this option to
Disable
if your graphics card does not support DisplayPort
1.2.
noTe
DisplayPort eQ
Enables or disables DisplayPort EQ.
y
Depending on the graphics card, enable this feature if any screen or audio noise occurs.
For some graphics cards, high-resolution output may not be available.
noTe
settings
easy control
language
english
>
Power leD
on
>
function
automatic standby
off
>
DisplayPort 1.2
enable
>
PbP
DisplayPort eQ
Disable
>
osD lock
off
>
screen
settings
Reset
▲/▼: Move
/ ►: OK
◄: Back
Summary of Contents for 31mu97
Page 39: ......