24
ENG
ENGLISH
MAKING CONNECTIONS
MAKING CONNECTIONS
The illustrations in this manual may differ from the actual product and item.
Connect various external devices to the TV and switch input modes to select an external device. For more
information of external device’s connection, refer to the manual provided with each device.
Available external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC,
gaming devices, and other external devices.
NOTE
y
The external device connection may differ from the model.
y
Connect external devices to the TV regardless of the order of the TV port.
y
If you record a TV program on a DVD recorder or VCR, make sure to connect the TV signal input cable
to the TV through a DVD recorder or VCR. For more information of recording, refer to the manual
provided with the connected device.
y
Refer to the external equipment’s manual for operating instructions.
y
If you connect a gaming device to the TV, use the cable supplied with the gaming device.
y
In PC mode, there may be noise associated with the resolution, vertical pattern, contrast or brightness.
If noise is present, change the PC output to another resolution, change the refresh rate to another rate
or adjust the brightness and contrast on the PICTURE menu until the picture is clear.
y
In PC mode, some resolution settings may not work properly depending on the graphics card.
y
In PC mode, the synchronization input form for Horizontal and Vertical frequencies is separate.
Antenna connection
Connect the TV to a wall antenna with an RF cable (75Ω).
NOTE
y
Use a signal splitter to use more than 2 TVs.
y
If the image quality is poor, install a signal amplifier properly to improve the image quality.
y
If the image quality is poor with an antenna connected, try to realign the antenna in the correct direction.
y
An antenna cable and converter are not supplied.
ANTENNA
IN
CABLE
IN
ANTENNA
IN
CABLE IN
ANTENNA
CABLE
IN
IN
or
or
Only LM3400/CS460
Only LS5600
Only LS3500
