INS
TALLA
TION
MENU
7
PUBLIC DISPLAY SETUP
Use the
D
D
or
E
E
button to select desired menu options.
Use the
F
F
or
G
G
button to adjust the menu option settings.
Set item to act TV with standalone.
2
1
Installation Menu (V1.0)
Public Display Settings
G
TV Link-Loader
G
Password Change
G
Set ID setup
G
Public Display Settings
Public Display Mode
No
Start Channel
No
Ch. Type
DTV
Major
12
Minor
2
Minimum Volume
0
Maximum Volume
100
Start Volume
No
Level
15
Power Management
No
Setting
7
Key Management
0
Factory Reset
0
Aspect Ratio
0
0
01
1.. PPuub
blliicc D
Diissp
pllaayy M
Mo
od
dee
If ‘Public Display Mode is set to Yes (Enabled), all functions of Public Display
Settings are active. If ‘Public Display Mode is set to No (Disabled), all functions
of Public Display mode are not active.
0
02
2.. SSttaarrtt C
Chhaannnneell
This function allows you to determine the initial channel number when the TV
is turned On. This feature is useful for an in-house information channel, since
the TV would always select that channel when it is turned On. Setting this to
255 causes the last channel viewed when the TV was turned Off, to be the
tuned to channel when the TV is turned On again.
0
03
3.. M
Miinniim
muum
m V
Vo
olluum
mee
This function determines the minimum volume level allowable with the VOLUME
(VOL) Up/Down control. In this way, for example, someone cannot set the vol-
ume too low to hear. The value range is from 0 to 63 — change values with ADJ
Left/Right arrow. The factory default is 0, which provides the full range of vol-
ume control, if item 009 MAX VOLUME is also set to 63. It may be best to set
the same value on every TV.
NOTE: The minimum volume level cannot have a value setting higher than the
MAX VOLUME level (described below).
0
04
4.. M
Maaxxiim
muum
m V
Vo
olluum
mee
This function determines the maximum volume level allowable with the VOL-
UME (VOL) Up/Down controls. In this way, for example, someone can not set
the volume level high enough to disturb others. The value range is 0 to 63, with
63 as the default, which gives the user the full range of volume control, if item
008 MIN VOLUME is also set at 0. Change values with ADJ Left/Right arrow
keys. It may be best to set the same value on every TV.
NOTE: The maximum volume level cannot have a value setting lower than the
MIN VOLUME level (described previously).
Public Display Mode Menu Items
