LG 32LH500D Owner'S Manual Download

Page: 7 / 286

ENGLISH

Preparing

NOTE

• If the TV is turned on for the first time after it was shipped from the

factory, initialization of the TV may take a few minutes.

• Image shown may differ from your TV.
• Your TV’s OSD (On Screen Display) may differ slightly from that

shown in this manual.

• The available menus and options may differ from the input source

or product model that you are using.

• New features may be added to this TV in the future.
• The TV can be placed in standby mode in order to reduce the power

consumption. And the TV should be turned off if it will not be
watched for some time, as this will reduce energy consumption.

• The energy consumed during use can be significantly reduced

if the level of brightness of the picture is reduced, and this will
reduce the overall running cost.

• The items supplied with your product may vary depending on the

model.

• Product specifications or contents of this manual may be changed

without prior notice due to upgrade of product functions.

• For an optimal connection, HDMI cables and USB devices should

have bezels less than 10 mm thick and 18 mm width. Use an
extension cable that supports USB 2.0 if the USB cable or USB
memory stick does not fit into your TV’s USB port.

10 mm

18 mm

• Use a certified cable with the HDMI logo attached.
• If you do not use a certified HDMI

cable, the screen may not display

or a connection error may occur. (Recommended HDMI

Cable Types)

- High-Speed HDMI®/

Cable (3m or less)

- High-Speed HDMI®/

Cable with Ethernet (3m or less)

CAUTION

• Do not use any unapproved items to ensure the safety and product

life span.

• Any damage or injuries caused by using unapproved items are not

covered by the warranty.

• Some models have a thin film attached on to the screen and this

must not be removed.

• When attaching the stand to the TV set, place the screen facing

down on a cushioned table or flat surface to protect the screen
from scratches.

• Make sure that the screws are fastened completely. (If they are

not fastened securely enough, the TV may tilt forward after being
installed.) Do not use too much force and over tighten the screws;
otherwise screw may be damaged and not tighten correctly.

Maintenance

Cleaning your TV

Clean your TV regularly to keep the best performance and to extend the
product lifespan.

• Make sure to turn the power off and disconnect the power cord and

all other cables first.

• When the TV is left unattended and unused for a long time,

disconnect the power cord from the wall outlet to prevent possible
damage from lightning or power surges.

Screen, frame, cabinet and stand

To remove dust or light dirt, wipe the surface with a dry, clean, and
soft cloth.
To remove major dirt, wipe the surface with a soft cloth dampened in
clean water or a diluted mild detergent. Then wipe immediately with
a dry cloth.

• Avoid touching the screen at all times, as this may result in damage

to the screen.

• Do not push, rub, or hit the screen surface with your fingernail or a

sharp object, as this may result in scratches and image distortions.

• Do not use any chemicals as this may damage the product.
• Do not spray liquid onto the surface. If water enters the TV, it may

result in fire, electric shock, or malfunction.

Power cord

Remove the accumulated dust or dirt on the power cord regularly.