14
ENGLISH
Installing-the-wall-mount-plate
This monitor meets the specifications for the wall mount
plate or other compatible devices.
1
Place the screen face down. To protect the monitor
panel (screen), cover the surface with a soft cloth or
the monitor protection pad included in the product
package.
2
Remove the four screws tightened on the back of the
monitor.
3
Place the wall mount plate onto the monitor and align
it with the screw holes.
4
Tighten the four screws using a screwdriver to fix the
plate to the monitor.
1
Place the monitor’s screen face down. To protect the
screen from scratches, cover the surface with a soft
cloth.
2
Remove the stand from the monitor by pressing
the button on the bottom center of the back of the
monitor.
y
y
The wall mount plate is sold separately.
y
y
For more information on installation, refer to the
wall mount plate’s installation guide.
y
y
Be careful not to apply too much force while
mounting the wall mount plate as it may cause
damage to the screen.
NOTE
To install the monitor to a wall, attach a wall mounting
bracket (optional) to the back of the monitor.
Make sure that the wall mounting bracket is securely fixed
to the monitor and to the wall.
1
If you use screws longer than the standard length, it
may damage the inside of the product.
2
A non-VESA standard screw may damage the product
and cause the monitor to fall. LG Electronics is not
liable for any accidents relating to the use of non-
standard screws.
Installing-on-the-Wall
Install the monitor at least 100 mm away from the wall
and leave about 100 mm of space at each side of the
monitor to ensure sufficient ventilation. Detailed instal-
lation instructions can be obtained from your local retail
store. Alternatively, please refer to the manual for how
to install and set up a tilting wall mounting bracket.
100 mm
100 mm
100 mm
100 mm
Wall-Mount-(mm)
100 x 100
Standard-screw
M4 x L10
Number-of-screws
4
Wall-Mount-Plate
(Optional)-
RW120
Detaching-the-Stand-Body
Front
Rear
