background image

10-3. Temperature Threshold

V

Threshold Down Low

20

V

Threshold Up Low

23

V

Threshold Down High 70

V

Threshold Up High

75

11. Touch Pen Operating check 

(Pen touch model only)

- applied model : 50PT490B / 50PT490E / 60PZ850B

(1) Press Pen mode hot key to insert check mode in POWER

ONLY condition. 

(Green Pen mode key on center of remocon)

(2) Pen check mode 

: You can see a 2X5 matrix. 

(Checker have to use right-hand.)

(3) 2X5 Matrix construction : When the screen is divided by

fixel in 16:9, matrix is applicable 14th,15th fixel in row, 3rd
~ 7th fixel in colume. And they are numbered from 1 to 10. 

(TV & Jig Monitor is numbered samely.)

(4) When checker touched a box numbered 3 of Pen touch

TV, same box of JIG monitor blinks three times.    

12. USB DOWNLOAD 

(*.epk file download)

V

Put the USB Stick to the USB socket

V

Press Menu key, and move OPTION 

V

Press “FAV” Press 7 times.

V

Select download file (epk file)

V

After download is finished, remove the USB stick.

Press “IN-START” key of ADJ remote control, check the
S/W version.

- 12 -

LGE Internal Use Only

Copyright ©2011 LG Electronics Inc. All rights reserved. 
Only for training and service purposes

Summary of Contents for 42PT250B







































































Reviews: