LG 43LJ510T-TA, Manual

ENGLISH

5

• 

Periodically examine the cord of your appliance, and if its 

appearance indicates damage or deterioration, unplug it, 
discontinue use of the appliance, and have the cord replaced with 
an exact replacement part by an authorized servicer.

• 

Prevent dust collecting on the power plug pins or outlet. This may 

cause a fire hazard.

• 

Protect the power cord from physical or mechanical abuse, such as 

being twisted, kinked, pinched, closed in a door, or walked upon. 
Pay particular attention to plugs, wall outlets, and the point where 
the cord exits the appliance.

• 

Do not press strongly upon the panel with a hand or sharp object 

such as nail, pencil or pen, or make a scratch on it, as it may 
cause damage to screen.

• 

Avoid touching the screen or holding your finger(s) against it for 

long periods of time. Doing so may produce some temporary or 
permanent distortion/damage to screen.

• 

As long as this unit is connected to the AC wall outlet, it is not 

disconnected from the AC power source even if you turn off this 
unit by SWITCH.

• 

When unplugging the cable, grab the plug and unplug it, by 

pulling at the plug. Don’t pull at the cord to unplug the power cord 
from the power board, as this could be hazardous.

• 

When moving the product, make sure you turn the power off first. 

Then, unplug the power cables, antenna cables and all connecting 
cables.
The TV set or power cord may be damaged, which may create a fire 
hazard or cause electric shock.

• 

When moving or unpacking the product, work in pairs because the 

product is heavy. Otherwise, this may result in injury.

• 

Refer all servicing to qualified service personnel. Servicing is 

required when the apparatus has been damaged in any way, such 
as power supply cord or plug is damaged, liquid has been spilled 
or objects have fallen into the apparatus, the apparatus has been 
exposed to rain or moisture, does not operate normally, or has 
been dropped.

• 

Do not use high voltage electrical goods near the TV (e.g. electric 

mosquito-swatter). This may result in product malfunction.

• 

When cleaning the product and its components, unplug the power 

first and wipe it with a soft cloth. Applying excessive force may 
cause scratches or discolouration. Do not spray with water or wipe 
with a wet cloth. Never use glass cleaner, aerial fresher, insecticide, 
lubricants, wax (car, industrial), abrasive, thinner, benzene, alcohol 
etc., which can damage the products and its panel. Otherwise, this 
may result in fire, electric shock or product damage (Deformation, 
corrosion or breakage).

Preparing

• 

Image shown may differ from your TV.

• 

Your TV’s OSD (On Screen Display) may differ slightly from that 

shown in this manual.

• 

The available menus and options may differ from the input source 

or product model that you are using.

• 

New features may be added to this TV in the future.

• 

The items supplied with your product may vary depending on the 

model.

• 

Product specifications or contents of this manual may be changed 

without prior notice due to upgrade of product functions.

• 

For an optimal connection, HDMI cables and USB devices should 

have bezels less than 10 mm thick and 18 mm width. Use an 
extension cable that supports USB 2.0 if the USB cable or USB 
memory stick does not fit into your TV’s USB port.

A

B

A

B

*A 

<

=

 10 mm

*B 

<

=

 18 mm

• 

Use a certified cable with the HDMI logo attached.

• 

If you do not use a certified HDMI cable, the screen may not display 

or a connection error may occur. (Recommended HDMI Cable Types)

-

High-Speed HDMI®/

TM

 cable (3 m or less)

-

High-Speed HDMI®/

TM

 cable with Ethernet (3 m or less)

• 

How to use the ferrite core (Depending on model)

-

Use the ferrite core to reduce the electromagnetic interference in 

the power cord. Wind the power cord on the ferrite core once.

[Wall side]

[TV side]

10 cm (+ / -2 cm)

• 

Do not use any unapproved items to ensure the safety 

and product life span.

• 

Any damage or injuries caused by using unapproved 

items are not covered by the manufacturer’s warranty.

• 

Some models have a thin film attached on to the 

screen and this must not be removed.

• 

When attaching the stand to the TV set, place the 

screen facing down on a cushioned table or flat 
surface to protect the screen from scratches.

• 

Make sure that the screws are inserted correctly and 

fastened securely. (If they are not fastened securely 
enough, the TV may tilt forward after being installed.) 
Do not use too much force and over tighten the 
screws; otherwise screw may be damaged and not 
tighten correctly.