ENGLISH
6
Attaching the TV to a Desk
(Depending on model)
The TV should be attached to a desk so it cannot be pulled in a forward/
backward direction, potentially causing injury or damaging the product.
A type
4-Screws
(Not supplied with TV)
Desk
Stand
•
Screw: M5 x L (*L: Table depth + 8~10 mm)
ex) Table depth: 15 mm, Screw: M5 x L25
B type
2-Screws for Stand Fixing,
2-Washers for Stand Fixing,
2-Nuts for Stand Fixing
(Supplied with TV)
Desk
Stand
Using the Kensington security
system
The Kensington security system connector is located at the rear of the
TV. For more information of installation and using, refer to the manual
provided with the Kensington security system or visit
Connect the Kensington security system cable between
the TV and a table.
(Depending on model)
Securing the TV to a Wall
(Depending on model)
1
Insert and tighten the eye-bolts, or TV brackets and bolts on the back
of the TV.
•
If there are bolts inserted at the eye-bolts position, remove the
bolts first.
2
Mount the wall brackets with the bolts to the wall.
Match the location of the wall bracket and the eye-bolts on the rear
of the TV.
3
Connect the eye-bolts and wall brackets tightly with a sturdy rope.
Make sure to keep the rope horizontal with the flat surface.
•
Use a platform or cabinet that is strong and large enough to support
the TV securely.
•
Brackets, bolts and ropes are not provided. You can obtain additional
accessories from your local dealer.
