LG 43UJ63 series Owner'S Manual Download

Page: 4 / 292

ENGLISH

•

Take care not to touch the ventilation openings when watching the

TV for long periods as the ventilation openings may become hot.
This does not affect the operation or performance of the product.

•

Periodically examine the cord of your appliance, and if its

appearance indicates damage or deterioration, unplug it,
discontinue use of the appliance, and have the cord replaced with
an exact replacement part by an authorized servicer.

•

Prevent dust collecting on the power plug pins or outlet. This may

cause a fire hazard.

•

Protect the power cord from physical or mechanical abuse, such as

being twisted, kinked, pinched, closed in a door, or walked upon.
Pay particular attention to plugs, wall outlets, and the point where
the cord exits the appliance.

•

Do not press strongly upon the panel with a hand or sharp object

such as nail, pencil or pen, or make a scratch on it, as it may
cause damage to screen.

•

Avoid touching the screen or holding your finger(s) against it for

long periods of time. Doing so may produce some temporary or
permanent distortion/damage to screen.

•

As long as this unit is connected to the AC wall outlet, it is not

disconnected from the AC power source even if you turn off this
unit by SWITCH.

•

When unplugging the cable, grab the plug and unplug it, by

pulling at the plug. Don’t pull at the cord to unplug the power cord
from the power board, as this could be hazardous.

•

When moving the product, make sure you turn the power off first.

Then, unplug the power cables, antenna cables and all connecting
cables.
The TV set or power cord may be damaged, which may create a fire
hazard or cause electric shock.

•

When moving or unpacking the product, work in pairs because the

product is heavy. Otherwise, this may result in injury.

•

Refer all servicing to qualified service personnel. Servicing is

required when the apparatus has been damaged in any way, such
as power supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has
been dropped.

•

Do not use high voltage electrical goods near the TV (e.g. electric

mosquito-swatter). This may result in product malfunction.

•

When cleaning the product and its components, unplug the power

first and wipe it with a soft cloth. Applying excessive force may
cause scratches or discolouration. Do not spray with water or wipe
with a wet cloth. Never use glass cleaner, car or industrial shiner,
abrasives or wax, benzene, alcohol etc., which can damage the
product and its panel. Otherwise, this may result in fire, electric
shock or product damage (Deformation, corrosion or breakage).

Preparing

•

If the TV is turned on for the first time after it was shipped from the

factory, initialization of the TV may take a few minutes.

•

Image shown may differ from your TV.

•

Your TV’s OSD (On Screen Display) may differ slightly from that

shown in this manual.

•

The available menus and options may differ from the input source

or product model that you are using.

•

New features may be added to this TV in the future.

•

The items supplied with your product may vary depending on the

model.

•

Product specifications or contents of this manual may be changed

without prior notice due to upgrade of product functions.

•

For an optimal connection, HDMI cables and USB devices should

have bezels less than 10 mm thick and 18 mm width. Use an
extension cable that supports USB 2.0 if the USB cable or USB
memory stick does not fit into your TV’s USB port.

10 mm

18 mm

•

Use a certified cable with the HDMI logo attached.

•

If you do not use a certified HDMI cable, the screen may not display

or a connection error may occur. (Recommended HDMI Cable Types)

High-Speed HDMI

cable (3 m or less)

High-Speed HDMI

cable with Ethernet (3 m or less)

•