17
206-4324
Note:
After it is turned ON, the TV begins an initialization process, and it may take several minutes
for the LG First Use Wizard to appear.
The LG First Use Wizard, comprising EZ-Manager Wizard and Express Script configuration
options, will appear on the screen each time the TV is turned ON, until one of its configuration
methods has been completed or the wizard is exited. Use the Installer Remote to make selections
and complete each step.
• The primary purpose of the EZ-Manager Wizard is to guide you through the process (automated
or manual) of configuring the essential Installer Menu items for Pro:Centric operation. However,
while intended primarily for Pro:Centric-related configuration, the EZ-Manager Wizard also offers
Zoning options. UV770M TVs support the TV Zoning and Wi-Fi Zoning features, both of which
enable location-specific configurations (see Reference section, “Using the TV’s Zoning Features,”
for further information). The EZ-Manager Wizard enables you to set the TV Zone # and/or the
Wi-Fi Zone # in the TV as part of the configuration process.
The EZ-Manager Wizard also enables you to access the TV Manager / USB download options
as part of the configuration process, if desired, to perform USB configuration and/or update
functions.
• The Express Script guides you th
rough the process of configuring the TV for FTG Mode via CPU
operation with Hospital Mode features. This includes setting up the pillow speaker, as required,
as well as setting up channel banks (up to four) for tiered channel programming. The Express
Script also enables you to configure the Pro:Centric settings on the TV.
Note that the Express Script uses the TV’s standard RF Auto Tuning feature to create the TV’s
channel lineup; IP channels are not supported.
Caution: Do NOT unplug the TV power cord or remove the antenna cable or, if
applicable, the LAN cable during the configuration process, as doing so will interrupt
the current step and may corrupt the configuration data.
Note: If you do not intend to complete the Express Script, but you wish to enable
Hospital Mode (pillow speaker functionality and also channel banks), you must set
Installer Menu item 027 HOSPITAL MODE appropriately. See the “Installer Menu”
section of this document for further information.
Before You Begin
• If you plan to create a customized Master TV Setup using the procedure described on pages 55
to 57, be sure to exit the LG First Use
Wizard in order to avoid setup conflicts or setting modes
that may cause the TV to malfunction or restrict the custom setup procedure. See also “Initiate
Configuration or Exit the LG
First Use Wizard” on the following page.
• If it has been completed or exited and therefore does not display, the First Use Wizard can be
reactivated; however, this requires that you restore the TV to a factory default condition. See
Reference section, “Restoring Factory Defaults on the TV(s),” for further information.
• If you would like to enable the SoftAP and/or DIAL Media Share features or select pre-loaded/
Smart Launcher applications on a TV that will eventually be configured for FTG Mode, you will
need to use the IP Environment Menu to do so before the TV is configured for FTG Mode. Refer
to “IP Environment Setup” on pages 72 to 81 for information on the IP Environment Menu. See
also “Custom Master TV Setup” on pages 55 to 57.
LG First Use Wizard
