36
206-4324
(Continued from previous page)
Configuration progress will be shown at the bottom of the screen. When this step is complete, the
Express Script exits, and the TV tunes to the first channel in the FTG Channel Map.
Also when
the Express Script is complete, the TV is set for Channel Bank 1. If required, you can set up/modify
channel banks at a later time using LG’s Cloud Configuration Tool.
See “Channel Banks Overview”
below for further information.
Note:
If desired, the TV Setup created from the Express Script may also be saved to a USB
memory device and used for cloning purposes (see “Cloning Procedures” on pages 50 to 56 for
further information).
Note:
Aux inputs (if enabled) will appear between the highest analog and lowest digital channel
number in the FTG Channel Map when Channel Up/Down is used on the Installer Remote.
Note:
If you did not run Auto Tuning and all Aux inputs are disabled, an FTG Channel Map will NOT
be created and the TV will not be configured for FTG Mode via CPU.
Channel Banks Overview
Channel banks enable institution administrators to create tiered channel programming on patient
in-room TVs. Each channel bank may offer a custom channel lineup for a pre-determined fee. The
Express Script enables you to configure four channel banks (1, 2, 3, and 4) for the channel lineup
(see step 5 of procedure above and also example below). The top tier generally contains the most
programming (premium, etc.), 2nd tier = lesser programming, 3rd tier = basic programming, etc. It
is also possible to create an Inactive TV display with Channel Bank 4, so that an “Inactive TV Call
Attendant” message appears when the TV is turned ON. In this case, an administrator can then
select another channel bank on the patient’s in-room TV depending on the programming tier
requested by the patient.
All channels found during Auto Tuning automatically are added to and active in all four channel
banks. See “Channel Attributes and Channel Bank Allocation” below for further information. If you
would like to modify channel banks after completing the Express Script (or after enabling Hospital
Mode by setting Installer Menu item 027 accordingly), you can save (export) the FTG Channel Map
to a USB memory device and then use the Cloud Configuration Tool to make the required changes
(see also “Updating Channel Attributes and/or Channel Bank Allocation” below).
EDIT THE CHANNEL LINEUP
SAVE
BACK
NEXT
BACK
X
06
Edit the channel lineup as applicable/required.
Searched channels: 135; Enabled Aux: 3; Added channels: 128; Added Aux: 3
You can add up to 600 channels (Aux added as analog).
Channel
<
NORMAL
>
Bank 1
<
ADDED
>
Bank 2
<
ADDED
>
Bank 3
>
>
Express Script (Cont.)
