APPENDIX
114
APPENDIX
1
11
1.. SShhaarrppnneessss ((C
Coom
mm
maanndd:: kk kk))
To adjust screen sharpness.
You can also adjust sharpness in the PICTURE menu.
Transmission
[k][k][ ][Set ID][ ][Data][Cr]
Data Min: 00
~
Max: 64 (*transmit by Hexadecimal code)
*Refer to ‘Real data mapping’.
Acknowledgement
[k][ ][Set ID][ ][OK/NG][Data][x]
1
12
2.. O
OSSD
D SSeelleecctt ((C
Coom
mm
maanndd:: kk ll))
To select OSD (On Screen Display) on/off.
Transmission
[k][l][ ][Set ID][ ][Data][Cr]
Data 00: OSD off
Data 01: OSD on
Acknowledgement
[l][ ][Set ID][ ][OK/NG][Data][x]
1
13
3.. R
Reem
moottee C
Coonnttrrooll LLoocckk M
Mooddee ((C
Coom
mm
maanndd:: kk m
m))
To lock the remote control and the front panel controls
on the set.
Transmission
[k][m][ ][Set ID][ ][Data][Cr]
Data 00: Lock off
Data 01: Lock on
Acknowledgement
[m][ ][Set ID][ ][OK/NG][Data][x]
If you’re not using the remote control and front panel
controls on the TV, use this mode. When main power is
on/off, remote control lock is released.
If Key Lock is on in the standby mode, TV will not turn on
by POWER button of remote control and on the TV.
1
14
4.. T
Trreebbllee ((C
Coom
mm
maanndd:: kk rr))
To adjust treble.
You can also adjust treble in the AUDIO menu.
Transmission
[k][r][ ][Set ID][ ][Data][Cr]
Data Min: 00
~
Max: 64 (*transmit by Hexadecimal code)
*Refer to ‘Real data mapping’.
Acknowledgement
[r][ ][Set ID][ ][OK/NG][Data][x]
1
15
5.. B
Baassss ((C
Coom
mm
maanndd:: kk ss))
To adjust bass.
You can also adjust bass in the AUDIO menu.
Transmission
[k][s][ ][Set ID][ ][Data][Cr]
Data Min: 00
~
Max: 64 (*transmit by Hexadecimal code)
*Refer to ‘Real data mapping’.
Acknowledgement
[s][ ][Set ID][ ][OK/NG][Data][x]
1
16
6.. B
Baallaannccee ((C
Coom
mm
maanndd:: kk tt))
To adjust balance.
You can also adjust balance in the AUDIO menu.
Transmission
[k][t][ ][Set ID][ ][Data][Cr]
Data Min: 00
~
Max: 64 (*transmit by Hexadecimal code)
*Refer to ‘Real data mapping’.
Acknowledgement
[t][ ][Set ID][ ][OK/NG][Data][x]
1
17
7.. C
Coolloorr T
Teem
mppeerraattuurree ((C
Coom
mm
maanndd:: kk uu))
To adjust color temperature.
You can also adjust color temperature in the PICTURE menu.
Transmission
[k][u][ ][Set ID][ ][Data][Cr]
Data 00: Medium 01: Cool 02: Warm
Acknowledgement
[u][ ][Set ID][ ][OK/NG][Data][x]
1
18
8.. EEnneerrggyy SSaavviinngg ((C
Coom
mm
maanndd:: jj qq))
To control the energy saving function.
Transmission
[ j ][q][ ][Set ID][ ][Data][Cr]
Data 00: Energy saving - off
01: Energy saving - Minimum
02: Energy saving - Medium
03: Energy saving - Maximum
05: Energy saving - Screen off
Acknowledgement
[q][ ][Set ID][ ][OK/NG][Data][x]
1
19
9.. A
Auuttoo C
Coonnffiigguurraattiioonn ((C
Coom
mm
maanndd:: jj uu))
To adjust picture position and minimize image shaking
automatically. Auto configuration only works in RGB-PC
mode.
Transmission
[ j ][u][ ][Set ID][ ][Data][Cr]
Data 01: To set
Acknowledgement
[u][ ][Set ID][ ][OK/NG][Data][x]
2
20
0.. C
Chhaannnneell T
Tuunniinngg ((C
Coom
mm
maanndd:: m
m aa))
To tune channel to following physical/major/minor number.
Transmission
[m][a][ ][Set ID][ ][Data00][ ][Data01]
[ ][Data02][ ][Data03][ ][Data04][ ][Data05][Cr]
Digital channels have a Physical, Major, and Minor channel
number. The Physical number is the actual digital channel
number, the Major is the number that the channel should
be mapped to, and the Minor is the sub-channel. Since
the ATSC tuner automatically maps the channel to the
Major number, the Physical number is not required when
sending a command.
Data 00: Physical Channel Number
NTSC air: 02
~
45, NTSC cable: 01, 0E
~
7D
ATSC air: 01
~
45, ATSC cable: 01
~
87
Data 01 & 02: Major Channel Number
Data 01: High byte Data 02: Low byte
Two bytes are available for the Major and Minor, nor-
mally only the second byte is used.
Data 03 & 04: Minor Channel Number
Not needed for NTSC.
PTAC DIRECT SALES
(866) 648-8486
WWW.PTACDIRECT.COM
