LG 49UF770V.AEK, Owner'S Manual

14

ENGLISH

Euro scart connection

(Depending on model)
Transmits the video and audio signals from an external device to the 
TV set. Connect the external device and the TV set with the euro scart 
cable.

                                                                    Output Type                                                       

Current

input mode

AV1

(TV Out

1

)

Digital TV

Digital TV

Analogue TV, AV

Analogue TV

Component
HDMI

1  TV Out : Outputs Analogue TV or Digital TV signals.

•  Any Euro scart cable used must be signal shielded.
•  When watching digital TV in 3D imaging mode, only 2D out signals 

can be output through the SCART cable. (Only 3D models)

•  If you use the Time Machine function on digital TV, TV out signals 

cannot be output through the SCART cable.

CI module connection

(Depending on model)
View the encrypted (pay) services in digital TV mode. 

•  Check if the CI module is inserted into the PCMCIA card slot in the 

right direction. If the module is not inserted properly, this can 
cause damage to the TV and the PCMCIA card slot.

•  If the TV does not display any video and audio when CI+ CAM is 

connected, please contact to the Terrestrial/Cable/Satellite Service 
Operator.

USB connection

Some USB Hubs may not work. If a USB device connected using a USB 
Hub is not detected, connect it to the USB port on the TV directly.

Other connections

Connect your TV to external devices. For the best picture and audio 
quality, connect the external device and the TV with the HDMI cable. 
Some separate cable is not provided.

• 

Picture

HDMI ULTRA HD Deep 

Colour 

-

On

 : Support 4K @ 50/60 Hz (4:4:4, 4:2:2, 4:2:0)

-

Off

 : Support 4K @ 50/60 Hz (4:2:0)

If the device connected to Input Port also supports ULTRA HD Deep 
Colour, your picture may be clearer. However, if the device doesn’t 
support it, it may not work properly. In that case, connect the device 
to a different HDMI port or change the TV’s 

HDMI ULTRA HD Deep 

Colour

 setting to 

Off

.  

(This feature is available on certain models which are supported 
ULTRA HD Deep Colour only.) 

 NOTE

•  Supported HDMI Audio format : 

Dolby Digital (32 kHz, 44.1 kHz, 48 kHz),
DTS (44.1 kHz, 48 kHz),
PCM (32 kHz, 44.1 kHz, 48 kHz, 96 kHz, 192 kHz)
(Depending on model)

Remote control

The descriptions in this manual are based on the buttons on the remote 
control. Please read this manual carefully and use the TV correctly.
To replace batteries, open the battery cover, replace batteries (1.5 
V AAA) matching the   and   ends to the label inside the 
compartment, and close the battery cover. To remove the batteries, 
perform the installation actions in reverse.

 CAUTION

•  Do not mix old and new batteries, as this may damage the remote 

control.

•  The remote control will not be included for all sales market.

Make sure to point the remote control toward the remote control sensor 
on the TV.