background image

16

ENGLISH

_Inde

x

Abnormal display

 • If the product feels cold to the touch, there may be a small “flicker” 

when it is turned on. This is normal, there is nothing wrong with 
product.

 • This panel is an advanced product that contains millions of pixels. 

You may see tiny black dots and/or brightly coloured dots (red, blue 
or green) at a size of 1 ppm on the panel. This does not indicate a 
malfunction and does not affect the performance and reliability of 
the product. This phenomenon also occurs in third-party products 
and is not subject to exchange or refund.

 • You may find different brightness and colour of the panel depending 

on your viewing position(left/right/top/down). 
This phenomenon occurs due to the characteristic of the panel. It is 
not related with the product performance, and it is not malfunction.

 • Displaying a still image for a prolonged period of time may cause 

image sticking. Avoid displaying a fixed image on the TV screen for a 
long period of time.

Generated sound

 • “Cracking” noise: A cracking noise that occurs when watching or 

turning off the TV is generated by plastic thermal contraction due to 
temperature and humidity. This noise is common for products where 
thermal deformation is required.

 • Electrical circuit humming/panel buzzing: A low level noise is 

generated from a high-speed switching circuit, which supplies a large 
amount of current to operate a product. It varies depending on the 
product. This generated sound does not affect the performance and 
reliability of the product.

 • When cleaning the product, be careful not to allow any 

liquid or foreign objects to enter the gap between the 
upper, left or right side of the panel and the guide panel. 
(Depending on model)

 • Make sure to wring any excess water or cleaner from the 

cloth.

 • Do not spray water or cleaner directly onto the TV screen.
 • Make sure to spray just enough of water or cleaner onto a 

dry cloth to wipe the screen.

Summary of Contents for 50US660H Series











































Reviews: