A-10
SETTING UP THE TV / MAKING CONNECTIONS
MAKING CONNECTIONS
This section on
MAKING CONNECTIONS
mainly uses
diagrams for the EG9609 models.
Antenna connection
Wall
antenna
socket
(*Not
provided)
English
Connect the TV to a wall antenna socket with an RF cable
(75 Ω).
y
The external device connection may differ from the
model.
y
Use a signal splitter to use more than 2 TVs.
y
If the image quality is poor, install a signal amplifier
properly to improve the image quality.
y
If the image quality is poor with an antenna
connected, try to realign the antenna in the correct
direction.
y
An antenna cable and converter are Not provided.
y
Supported DTV Audio: MPEG, Dolby Digital, Dolby
Digital Plus, HE-AAC
y
For a location that is not supported with ULTRA
HD broadcasting, this TV cannot receive ULTRA HD
broadcasts directly. (Depending on model)
NOTE
Tidying cables
Image shown may differ from your TV.
Gather and bind the cables with the cable holder.
Cable holder
y
Do not move the TV by holding the cable holder,
as the cable holder may break, and injuries and
damage to the TV may occur.
CAUTION
