15
ENGLISH
_inde
x
Open Source Software
Notice Information
To obtain the source code under GPL, LGPL, MPL, and other open
source licenses, that is contained in this product, please visit
opensource.lge.com.
In addition to the source code, all referred license terms, warranty
disclaimers and copyright notices are available for download.
LG Electronics will also provide open source code to you on CD-ROM
for a charge covering the cost of performing such distribution (such
as the cost of media, shipping, and handling) upon email request to
opensource@lge.com.
This offer is valid for a period of three years after our last shipment of
this product. This offer is valid to anyone in receipt of this information.
Licenses
(Magic Remote supported models only)
Regulatory
WARNING! (STABILITY HAZARD)
-
A television set may fall, causing serious personal injury or
death. Many injuries, particularly to children, can be avoided by
taking simple precautions such as:
-
ALWAYS use cabinets or stands or mounting methods
recommended by the manufacturer of the television set.
-
ALWAYS use furniture that can safely support the television set.
-
ALWAYS ensure the television set is not overhanging the edge of
the supporting furniture.
-
ALWAYS educate children about the dangers of climbing on
furniture to reach the television set or its controls.
-
ALWAYS route cords and cables connected to your television so
they cannot be tripped over, pulled or grabbed.
-
NEVER place a television set in an unstable location.
-
NEVER place the television set on tall furniture (for example,
cupboards or bookcases) without anchoring both the furniture
and the television set to a suitable support.
-
NEVER place the television set on cloth or other materials that
may be located between the television set and supporting
furniture.
-
NEVER place items that might tempt children to climb, such as
toys and remote controls, on the top of the television or furniture
on which the television is placed.
If the existing television set is going to be retained and relocated, the
same considerations as above should be applied.
Symbols
Refers to alternating current(AC).
Refers to direct current(DC).
Refers to class II equipment.
Refers to stand-by.
Refer to “ON” (power).
Refers to dangerous voltage.
