APPENDIX
146
APPENDIX
Transmission / Receiving Protocol
T
Trraan
nssm
miissssiio
on
n
[Command 1] : First command to control the set.
(j, k, m or x)
[Command 2] : Second command to control the set.
[Set ID] : You can adjust the set ID to choose desired TV ID
number in Setup menu. Adjustment range is 1
~
99.
When selecting Set ID ‘0’, every connected the TV
is controlled. Set ID is indicated as decimal (1
~
99) on menu and as Hexa decimal (0x0
~
0x63) on
transmission/receiving protocol.
[DATA] : To transmit command data.
Transmit ‘FF’ data to read status of command.
[Cr] : Carriage Return
ASCII code ‘0x0D’
[ ] : ASCII code ‘space (0x20)’
*In this model, TV will not send the status during the standby
mode.
O
OK
K A
Acckkn
no
ow
wlleed
dg
geem
meen
ntt
The TV transmits ACK (acknowledgement) based on this
format when receiving normal data. At this time, if the data
is data read mode, it indicates present status data. If the
data is data write mode, it returns the data of the PC com-
puter.
*in this model, TV will not send the status during the standby
mode.
*data format
[command 2] : use as command.
[Set ID] : use the small character, if set ID is 10, it will send
the ‘0’,’a’
[Data] : use the small character, if data is 0xab, it will send
the ‘a’, ‘b’
[OK] : use the large character
*in this model, TV will send the echo, CR, LF with ack mes-
sage.
When it send the power on ack message, it will be like below.
Ex) ka 01 01(CR)(LF)a 01 OK01x(CR)(LF)
[[C
Co
om
mm
maannd
d1
1]][[C
Co
om
mm
maannd
d2
2]][[ ]][[SSeett IID
D]][[ ]][[D
Daattaa]][[C
Crr]]
[[C
Co
om
mm
maannd
d2
2]][[ ]][[SSeett IID
D]][[ ]][[O
OK
K]][[D
Daattaa]][[xx]]
E
Errrro
orr A
Acckkn
no
ow
wlleed
dg
geem
meen
ntt
The TV transmits ACK (acknowledgement) based on this
format when receiving abnormal data from non-viable func-
tions or communication errors.
Data1: Illegal Code
Data2: Not supported function
Data3: Wait more time
*in this model, TV will not send the status during
the standby mode.
*data format
[command 2] : use as command.
[Set ID] : use the small character, if set ID is 10, it
will send the ‘0’,’a’
[Data] : use the small character, if data is 0xab, it
will send the ‘a’, ‘b’
[NG] : use the large character
*in this model, TV will send the echo, CR, LF with
ack message.
When it send the power on ack message, it will be
like below.
Ex) ka 01 01(CR)(LF)a 01 NG01x(CR)(LF)
[[C
Co
om
mm
maannd
d2
2]][[ ]][[SSeett IID
D]][[ ]][[N
NG
G]][[D
Daattaa]][[xx]]
Summary of Contents for 60PB4D
Page 152: ......
